HardLabs

USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter

robsonsmartins·usbflashprog·hardware/adapters/ezoflash-cross/ezoflash-cross_adapter/ezoflash-cross_adapter.kicad_pcb

USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter PCB layout, top view — open source board by robsonsmartins
Simulate this board

About the USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter PCB

USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter is an open source PCB design by robsonsmartins, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 106.7 × 34.3 mm, with 8 components from 8 distinct parts.

By type, the board carries 2 connectors and 1 jumper.

It belongs with the usb & debug tools designs in this gallery.

From the project

A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

The most up-to-date schematic diagram can be accessed here: Schematic diagram of the USB Flash/EPROM Programmer.

The most up-to-date BOM can be accessed here: Bill of Materials of the USB Flash/EPROM Programmer.

The following CAD software (opensource and multiplatform) was used to draw the schematic diagram and PCB:

USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter, from the project README
From the project README

USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
UFPROG
J2
1
UFPROG
J3
1
EzoFlash+
BU3
1
EzoFlash+
BU4
1
EzoFlash+
BU10
1
EzoFlash+ 4.5
ICSP-SERIAL1
1
Conn_01x03_Pin
JP4JP5
1
Conn_01x02_Pin
JPI2C1

USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter design files

The KiCad project lives in the robsonsmartins/usbflashprog repository on GitHub; these links point at the commit this page was built from.

USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter: common questions

How big is the USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter PCB?

The USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter measures 106.7 × 34.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter design files?

From the robsonsmartins/usbflashprog repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the USB Flash/EPROM Programmer - EzoFlash+ Cross Adapter design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in usbflashprog

Similar boards