Dice temphumid rng
Roguillo·dice_temphumid_rng_pcb·dice_temphumid_rng_pcb_kicad/first_pcb.kicad_pcb
About the Dice temphumid rng PCB
Dice temphumid rng is an open source AVR/Arduino PCB design by Roguillo, published on GitHub. It is a 2-layer board measuring 102 × 40 mm, with 49 components from 23 distinct parts.
Its main chip is the ATmega32U4-A, from the AVR/Arduino family. Other key parts include the DHT11. By type, the board carries 16 diodes, 15 resistors, 6 capacitors, 3 transistors, 3 connectors and 2 ICs.
It belongs with the sensors designs in this gallery.
From the project
- consists of a small custom PCB featuring a temperature and humidity sensor, a 3-digit 7-segment display, and RGB LEDs in the form of die faces - After a startup LED animation across both the RGB LEDs and the display segments, the display constantly alternates between showing te
- consists of a small custom PCB featuring a temperature and humidity sensor, a 3-digit 7-segment display, and RGB LEDs in the form of die faces - After a startup LED animation across both the RGB LEDs and the display segments, the display constantly alternates between showing temperature and showing humidity - There is also a button that can be used for the following depending on press duration: - rolling dice (short): this will generate a random number from 2 to 12 to be displayed on the RGB LEDs for a second - generating a random number (medium): this will generate a random 3-digit number…
Main components on the Dice temphumid rng
Dice temphumid rng bill of materials (BOM)
49 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-A | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U3 |
| 3 | T2N7002AK | SOT-23 | Q1, Q2, Q3 |
| 1 | 16MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | ICSP | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | USB_B_Micro | USB_Micro-B_GCT_USB3076-30-A | J4 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | ~ | SW_SPST_PTS647_Sx38 | SW1 |
| 1 | LDT-N2804RI | LDT-N2804RI | LED1 |
| 1 | TX | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | RX | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 14 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D3, D4, D5, D6, D7, D8, D9, D10 +6 |
| 1 | 100uF | CP_Elec_5x5.3 | C1 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6 |
| 2 | 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 2 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 22 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 5k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 8 | 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10, R11, R12, R13, R14, R15 |
Dice temphumid rng design files
The KiCad project lives in the Roguillo/dice_temphumid_rng_pcb repository on GitHub; these links point at the commit this page was built from.
Dice temphumid rng: common questions
What microcontroller does the Dice temphumid rng use?
The Dice temphumid rng is built around the ATmega32U4-A, from the AVR/Arduino family.
How big is the Dice temphumid rng PCB?
The Dice temphumid rng measures 102 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dice temphumid rng?
49 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dice temphumid rng design files?
From the Roguillo/dice_temphumid_rng_pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dice temphumid rng design in my own project?
The repository has no license, so all rights stay with Roguillo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Dice temphumid rng without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k