Lcd standard-5R
About the Lcd standard-5R PCB
Lcd standard-5R is an open source STM32 PCB design by rohamid, published on GitHub. It is a 4-layer board measuring 137.4 × 82.6 mm, with 159 components from 59 distinct parts.
Its main chip is the STM32H743ZITx, from the STM32 family. Other key parts include the USBLC6-2SC6, AMS1117-3.3, MT48LC16M16A2P, MT25Q and CAT24C256. By type, the board carries 62 capacitors, 50 resistors, 13 diodes, 9 ICs, 9 connectors and 4 transistors.
It belongs with the displays & leds designs in this gallery.
From the project
PCB controller backpack for east rising LCD modules
Main components on the Lcd standard-5R
Lcd standard-5R bill of materials (BOM)
159 components, 59 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | STM32H743ZITx | LQFP-144_20x20mm_P0.5mm | U3 |
| 1 | MT48LC16M16A2P | TSOP-II-54_22.2x10.16mm_P0.8mm | U4 |
| 1 | MT25Q | WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U5 |
| 1 | CAT24C256 | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | XPT2046TS | TSSOP-16_4.4x5mm_P0.65mm | U7 |
| 1 | TPS61169 | SOT-353_SC-70-5 | U8 |
| 1 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U9 |
| 1 | DMG3415 | SOT-23 | Q1 |
| 3 | MMBT3904 | SOT-23 | Q2, Q3, Q4 |
| 1 | 25MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 32.768KHz | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | SWD | PinHeader_2x07_P1.27mm_Vertical_SMD | J2 |
| 1 | Micro_SD_Card_Det1 | SD-TF-115 | J4 |
| 1 | CTP_6P | Conn_FPC_6P_0.5mm_XUNPU_FPC-05FB-6PH20 | J5 |
| 1 | LCD_40P | Omron_XF2M-4015-1A_1x40-1MP_P0.5mm_Horizontal | J6 |
| 1 | Conn_01x02_MountingPin | Hirose_DF13C_CL535-0402-2-51_1x02-1MP_P1.25mm_Vertical | J7 |
| 1 | Serial | S4BXHSM4TBLFSN | J8 |
Show 39 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AUX_IO | Conn_FPC_10P_1mm_G-SWITCH_GT-F1008SR20-10SMT01 | J9 |
| 1 | CTP_10P | Conn_FPC_10P_0.5mm_OMRON_XF2M-1015-1A | J10 |
| 1 | S8411-45R | CR1220-Batt-conn-S8411-45R | BT1 |
| 1 | MLT-9650 | active-MLT-9650 | BZ1 |
| 2 | SW_Push | SW_SPST_PTS810 | SW1, SW2 |
| 1 | BOOT0 | SW_SPST_PTS810 | SW3 |
| 1 | RST | SW_SPST_PTS810 | SW4 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | GREEN | LED_0805_2012Metric | D2 |
| 1 | BAT54CW | SOT-23 | D3 |
| 1 | B5819WS | D_SOD-123 | D4 |
| 4 | MMSZ5226BT1G | D_SOD-123 | D5, D6, D7, D8 |
| 1 | MBR0540 | D_SOD-123 | D9 |
| 2 | RED | LED_0805_2012Metric | D10, D11 |
| 2 | BAT54S | SOT-23 | D12, D13 |
| 1 | 600R/100MHz | C_0805_2012Metric | FB1 |
| 2 | 600 | L_0805_2012Metric | FB2, FB3 |
| 1 | 4.7u | L_Abracon_ASPI-4030S | L1 |
| 4 | 10u | C_0805_2012Metric | C1, C41, C48, C55 |
| 40 | 100n | C_0402_1005Metric | C2, C5, C6, C7, C9, C11, C13, C14 +32 |
| 1 | 10uF | CP_EIA-3216-18_Kemet-A | C3 |
| 1 | 4u7/0805 | C_0805_2012Metric | C4 |
| 6 | 1u | C_0603_1608Metric | C8, C38, C49, C52, C53, C56 |
| 2 | 2u2 | C_0603_1608Metric | C10, C12 |
| 1 | 4u7 | C_0603_1608Metric | C24 |
| 2 | 16p | C_0402_1005Metric | C25, C26 |
| 2 | 10p | C_0402_1005Metric | C27, C28 |
| 1 | 10u/1206 | C_1206_3216Metric | C47 |
| 2 | 220p | C_0805_2012Metric | C60, C61 |
| 21 | 10K | R_0402_1005Metric | R1, R6, R7, R8, R9, R10, R11, R12 +13 |
| 3 | 2K | R_0402_1005Metric | R2, R32, R35 |
| 2 | 5K1 | R_0402_1005Metric | R4, R5 |
| 9 | 2K2 | R_0402_1005Metric | R14, R15, R16, R17, R18, R25, R26, R38 +1 |
| 1 | 4.7R | R_0603_1608Metric | R22 |
| 1 | 1M | R_0402_1005Metric | R28 |
| 1 | 100K | R_0402_1005Metric | R29 |
| 3 | 1K | R_0402_1005Metric | R30, R33, R36 |
| 7 | 50 | R_Array_Convex_4x0402 | RN1, RN2, RN3, RN4, RN5, RN6, RN7 |
| 2 | 10K_Pack | R_Array_Convex_4x0402 | RN8, RN9 |
Lcd standard-5R design files
The KiCad project lives in the rohamid/lcd-east-rising-backpack repository on GitHub; these links point at the commit this page was built from.
Lcd standard-5R: common questions
What microcontroller does the Lcd standard-5R use?
The Lcd standard-5R is built around the STM32H743ZITx, from the STM32 family.
How big is the Lcd standard-5R PCB?
The Lcd standard-5R measures 137.4 × 82.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Lcd standard-5R?
159 components, from 59 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lcd standard-5R design files?
From the rohamid/lcd-east-rising-backpack repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lcd standard-5R design in my own project?
The repository has no license, so all rights stay with rohamid. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lcd standard-5R without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in lcd-east-rising-backpack
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Type c
google
188 × 30 mm17 parts2LApache-2.02.9k
STM32Base
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type e
140.5 × 30 mm13 parts2LApache-2.02.9k