Test

RohanGhalib·SR-U2764·kicad/test.kicad_pcb

This repository ships a schematic but no board layout.

About the Test PCB

Test is an open source RP2040/RP2350 PCB design by RohanGhalib, published on GitHub. It is a 2-layer board, with 158 components from 4 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 78 switches, 78 diodes and 1 IC.

Main components on the Test

Test bill of materials (BOM)

158 components, 4 distinct parts.

QtyPartRefs
1
Pico
U2
1
SSD1306
Brd1
78
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +70
78
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +70

Test design files

The KiCad project lives in the RohanGhalib/SR-U2764 repository on GitHub; these links point at the commit this page was built from.

Test: common questions

What microcontroller does the Test use?

The Test is built around the Pico, from the RP2040/RP2350 family.

How big is the Test PCB?

The Test has 2 copper layers and is 1.6 mm thick.

How many components are on the Test?

158 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Test design files?

From the RohanGhalib/SR-U2764 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Test design in my own project?

The repository has no license, so all rights stay with RohanGhalib. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Test without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in SR-U2764

Similar boards