HardLabs

ROHM SensorPlatform Multi-Sensor-Shield

ROHMUSDC·ROHM_SensorPlatform_Multi-Sensor-Shield·HW Source Files/SENSORSHLD0-EVK-101 HW Design Files/Schematic_BOM/Revision 00.1/allegro/pstxnet.dat

This repository ships a schematic but no board layout.
Simulate this board

About the ROHM SensorPlatform Multi-Sensor-Shield

ROHM SensorPlatform Multi-Sensor-Shield is an open source PCB design by ROHMUSDC, published on GitHub. It is a board, with 1 components from 1 distinct parts.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

Applicable Part Number: SENSORSHLD0-EVK-101, SENSORSHLD1-EVK-101

Question 2: I just purchased a SENSORSHLD1-EVK-101. After testing it I noticed a "yellow sticker" on the back of the board and the pressure sensor code doesn't seem to work. What am I doing wrong here? Answer 2: The yellow sticker on-board designates that the board was built using the same SCH/BOM/LAYOUT as the SENSORSHLD1-EVK-101 design files show, however implements BM1383GLV instead of BM1383AGLV. Please refer to the sensor difference explanation between the BM1383GLV vs. BM1383AGLV at the following repository link: ...ROHMSensorPlatformMulti-Sensor-Shield\Documentation\Sensor…

ROHM SensorPlatform Multi-Sensor-Shield bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
GRM155R61A104KA01D
C1

ROHM SensorPlatform Multi-Sensor-Shield design files

The KiCad project lives in the ROHMUSDC/ROHM_SensorPlatform_Multi-Sensor-Shield repository on GitHub; these links point at the commit this page was built from.

ROHM SensorPlatform Multi-Sensor-Shield: common questions

How many components are on the ROHM SensorPlatform Multi-Sensor-Shield?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ROHM SensorPlatform Multi-Sensor-Shield design files?

From the ROHMUSDC/ROHM_SensorPlatform_Multi-Sensor-Shield repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.

Can I use the ROHM SensorPlatform Multi-Sensor-Shield design in my own project?

The repository has no license, so all rights stay with ROHMUSDC. Use it as a reference, and ask the author before reusing the design.

Similar boards