Soundspy
rojosinalma·soundspy·pcb/inmp441/soundspy-node.kicad_pcb
About the Soundspy PCB
Soundspy is an open source ESP32 PCB design by rojosinalma, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 30 × 68 mm, with 3 components from 3 distinct parts.
Its main chip is the ESP32_L, from the ESP32 family. Other key parts include the ESP32_R. By type, the board carries 2 ICs and 1 capacitor.
It belongs with the iot & wireless and audio designs in this gallery.
From the project
Multi-node sound monitoring for ESP32: I2S MEMS mics, six-band metering over MQTT, live audio relay, alerts and a web dashboard
ESP32 nodes with I2S MEMS microphones sample audio, meter it in six frequency bands plus an overall level, and publish the readings over MQTT. The dashboard discovers the nodes, shows live meters, spectrum and an hour of history per node, relays live audio from any node to the browser, and sends alerts (Telegram, Discord, ntfy, Pushover, email) when a configurable rule fires. One application is keeping an eye on how much of a rehearsal or a mix makes it through a shared wall; the same setup works for any room you want to listen to from elsewhere.

Main components on the Soundspy
Soundspy bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32_L | PinHeader_1x19_P2.54mm_Vertical | U1_L |
| 1 | ESP32_R | PinHeader_1x19_P2.54mm_Vertical | U1_R |
| 1 | C_Disc_D5.1mm_W3.2mm_P5.00mm | C_Disc_D5.1mm_W3.2mm_P5.00mm | C1 |
Soundspy design files
The KiCad project lives in the rojosinalma/soundspy repository on GitHub; these links point at the commit this page was built from.
Soundspy: common questions
What microcontroller does the Soundspy use?
The Soundspy is built around the ESP32_L, from the ESP32 family.
How big is the Soundspy PCB?
The Soundspy measures 30 × 68 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soundspy?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Soundspy design files?
From the rojosinalma/soundspy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Soundspy design in my own project?
Yes, under the terms of its AGPL-3.0 license, which rojosinalma chose for the repository.
Can I test firmware for the Soundspy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k