SysWORXX Pi Hat-IO Simulator
ronaldsieber·sysWORXX_Pi_Hat-IO_Simulator_PCB·sysWORXX_Pi_Hat-IO_Simulator_PCB/sysWORXX_Pi_Hat-IO_Simulator_PCB.kicad_pcb
About the SysWORXX Pi Hat-IO Simulator
SysWORXX Pi Hat-IO Simulator is an open source PCB design by ronaldsieber, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 56.5 mm, with 22 components from 17 distinct parts.
Other key parts include the MCP3202. By type, the board carries 6 resistors, 5 switches, 4 diodes, 3 capacitors, 1 IC and 1 connector.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCad Projekt des IO Simulator HAT für den sysWORXX Pi-AM62x
KiCad Projekt des IO Simulator HAT für den sysWORXX Pi-AM62x.
Der IO Simulator HAT stellt verschiedene Peripherie-Elemente bereit, um Experimente sowie Test- und Inbetriebnahme von Softwareprojekten auf dem sysWORXX Pi-AM62x zu vereinfachen.
Der IO Simulator HAT umfasst folgende Peripherie-Elemente: - 6x Digital Input (4x Push-Button, 2x DIP Switch) - 4x Digital Output (LED) - 2x Analog Input (2x Poti, via MCP3202 auf dem HAT)
Main components on the SysWORXX Pi Hat-IO Simulator
SysWORXX Pi Hat-IO Simulator bill of materials (BOM)
22 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP3202 | DIP-8_W7.62mm | U1 |
| 1 | sysWORXX_Pi_GPIO | Pin_Header_Straight_2x20 | J1 |
| 2 | 4k7 | Potentiometer_Trimmer_ACP_CA9v_Horizontal_Px10.0mm_Py5.0mm | RV100, RV101 |
| 1 | DI0 | SW_PUSH_6mm_h5mm | SW100 |
| 1 | DI1 | SW_PUSH_6mm_h5mm | SW101 |
| 1 | DI2 | SW_PUSH_6mm_h5mm | SW102 |
| 1 | DI3 | SW_PUSH_6mm_h5mm | SW103 |
| 1 | DI3/DI4 | SW_DIP_x2_W7.62mm_Slide | SW104 |
| 1 | DO0 | LED_D3.0mm | D100 |
| 1 | DO1 | LED_D3.0mm | D101 |
| 1 | DO2 | LED_D3.0mm | D102 |
| 1 | DO3 | LED_D3.0mm | D103 |
| 1 | 1µ | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1 |
| 2 | 100n | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C2, C3 |
| 1 | 10k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 4 | 270R | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R100, R101, R102, R103 |
| 1 | SIL 7-6 4,7K | R_Array_SIP7 | RN100 |
SysWORXX Pi Hat-IO Simulator design files
The KiCad project lives in the ronaldsieber/sysWORXX_Pi_Hat-IO_Simulator_PCB repository on GitHub; these links point at the commit this page was built from.
SysWORXX Pi Hat-IO Simulator: common questions
How big is the SysWORXX Pi Hat-IO Simulator?
The SysWORXX Pi Hat-IO Simulator measures 65 × 56.5 mm, has 2 copper layers and is 1.6002 mm thick.
How many components are on the SysWORXX Pi Hat-IO Simulator?
22 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the SysWORXX Pi Hat-IO Simulator design files?
From the ronaldsieber/sysWORXX_Pi_Hat-IO_Simulator_PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SysWORXX Pi Hat-IO Simulator design in my own project?
Yes, under the terms of its MIT license, which ronaldsieber chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979