Retro Stylophone
rorotaggf-ctrl·Retro_Stylophone·Retro_Stylophone_KiCAD/Retro_Stylophone.kicad_pcb
About the Retro Stylophone PCB
Retro Stylophone is an open source PCB design by rorotaggf-ctrl, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 120 × 80 mm, with 5 components from 5 distinct parts.
By type, the board carries 2 connectors, 1 buzzer and 1 switch.
It belongs with the retro computing and audio designs in this gallery.
From the project
a Retro Stylophone
A retro-style pocket synthesizer built with an ESP32 for Hack Club Half-Life (Week 3: Design Your Instrument).
The instrument utilizes the ESP32's built-in capacitive touch peripheral to create a 13-pad chromatic keyboard directly out of exposed PCB copper pads, completely eliminating mechanical button wear and complex key soldering.
- Microcontroller: ESP32 NodeMCU (USB-C, dual-core 240 MHz, 320 KB SRAM) - Keyboard: 13 capacitive touch PCB pads (Full chromatic octave: C4 to C5 including sharps/flats) - Sound Generation: 5V Passive Piezo Buzzer driven via hardware PWM / DAC output -…
Retro Stylophone bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | J_ESP_LINKS | PinSocket_1x19_P2.54mm_Vertical | J1 |
| 1 | J_ESP_RECHTS | PinSocket_1x19_P2.54mm_Vertical | J2 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | R_Potentiometer | Potentiometer_Alps_RK09L_Single_Vertical | RV1 |
| 1 | SW_SPDT | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
Retro Stylophone design files
The KiCad project lives in the rorotaggf-ctrl/Retro_Stylophone repository on GitHub; these links point at the commit this page was built from.
Retro Stylophone: common questions
How big is the Retro Stylophone PCB?
The Retro Stylophone measures 120 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Retro Stylophone?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Retro Stylophone design files?
From the rorotaggf-ctrl/Retro_Stylophone repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Retro Stylophone design in my own project?
Yes, under the terms of its GPL-3.0 license, which rorotaggf-ctrl chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kExpansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0k