Intraoral led driver
About the Intraoral led driver PCB
Intraoral led driver is an open source PCB design by rossuthoff, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 53.8 × 33.3 mm, with 29 components from 21 distinct parts.
Other key parts include the LT3478-1 and AD5247BKSZ10-RL7. By type, the board carries 8 capacitors, 8 resistors, 5 connectors, 2 ICs, 2 transistors and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
LED driver for oral cancer screening device
Main components on the Intraoral led driver
Intraoral led driver bill of materials (BOM)
29 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT3478-1 Linear Technologies | TSSOP-16-1EP_4.4x5mm_Pitch0.65mm | U1 |
| 1 | AD5247BKSZ10-RL7 AD5247 Analog Devices | SC-70-6 | U3 |
| 2 | SI2318DS-T1-E3 Si2318DS-T1 Vishay Siliconix | SOT-23 | Q1, Q2 |
| 2 | CONN_01X04 JST Sales America | JST_PH_S4B-PH-SM4-TB_04x2.00mm_Angled | J1, J3 |
| 1 | CONN_01X03 JST Sales America | JST_PH_S3B-PH-SM4-TB_03x2.00mm_Angled | J2 |
| 2 | CONN_01X02 JST Sales America | JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | J4, J5 |
| 1 | L101011MS02Q SW_SPST C&K | C&K_SPST_switch_L101011MS02Q | SW1 |
| 1 | PDS560-13 D_Schottky_AAK Diode Incorporated | D_PowerDI-5 | D1 |
| 1 | LNJ937W8CRA LED Panasonic Electric Components | LED_0603 | D2 |
| 1 | CDRH105RNP-6R8NC 6.8uH Sumida America Components | Sumida_L_CDRH105R | L1 |
| 1 | C1608X5R1E335K080AC 3.3uF TDK Corporation | C_0603 | C1 |
| 1 | C3216X5R1E475K160AA 4.7uF TDK Corporation | C_1206 | C2 |
| 1 | C4532X5R1E106M250KA 10uF TDK Corporation | C_1812 | C3 |
| 2 | CGB3B1X5R1E105K055AC 1uF TDK Corporation | C_0603 | C4, C6 |
| 2 | C1608X8R1E104K080AA 0.1uF TDK Corporation | C_0603 | C5, C7 |
| 1 | TPSA106K010R1800 10u AVX Corporation | CP_Tantalum_Case-A_EIA-3216-18_Reflow | C8 |
| 1 | RC0402FR-07100KL 100k Yageo | R_0402 | R1 |
| 1 | RC0402FR-0724KL 24k Yageo | R_0402 | R2 |
| 1 | RC0402FR-0769K8L 69.8k Yageo | R_0402 | R3 |
| 4 | RC0603FR-0710KL 10k Yageo | R_0603 | R4, R5, R7, R8 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0603FR-071KL 1k Yageo | R_0603 | R6 |
Intraoral led driver design files
The KiCad project lives in the rossuthoff/intraoral_led_driver repository on GitHub; these links point at the commit this page was built from.
Intraoral led driver: common questions
How big is the Intraoral led driver PCB?
The Intraoral led driver measures 53.8 × 33.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Intraoral led driver?
29 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Intraoral led driver design files?
From the rossuthoff/intraoral_led_driver repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Intraoral led driver design in my own project?
Yes, under the terms of its GPL-3.0 license, which rossuthoff chose for the repository.
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k