Multichannel led driver
rossuthoff·multichannel_led_driver
About the Multichannel led driver PCB
Multichannel led driver is an open source PCB design by rossuthoff, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 72.3 × 36.1 mm, with 69 components from 24 distinct parts.
Other key parts include the LT3478-1 and AD5247BKSZ10-RL7. By type, the board carries 33 resistors, 18 transistors, 8 capacitors, 4 connectors, 2 ICs and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
LED driver for up to nine LED strings
Main components on the Multichannel led driver
Multichannel led driver bill of materials (BOM)
69 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT3478-1 Linear Technologies | TSSOP-16-1EP_4.4x5mm_Pitch0.65mm | U1 |
| 1 | AD5247BKSZ10-RL7 AD5247 Analog Devices | SC-70-6 | U3 |
| 9 | SI2308CDS-T1-GE3 Si2312CDS Vishay Siliconix | SOT-23 | Q1, Q2, Q3, Q4, Q9, Q10, Q11, Q12 +1 |
| 9 | SI2309CDS-T1-GE3 Si2315BDS Vishay Siliconix | SOT-23 | Q5, Q6, Q7, Q8, Q13, Q14, Q15, Q16 +1 |
| 1 | CONN_01X04 JST Sales America | JST_PH_S4B-PH-SM4-TB_04x2.00mm_Angled | J1 |
| 1 | CONN_01X02 JST Sales America | JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | J4 |
| 1 | CONN_01X06 JST Sales America | JST_PH_S6B-PH-SM4-TB_06x2.00mm_Angled | P2 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04_Pitch2.54mm | P16 |
| 1 | L101011MS02Q SW_SPST C&K | C&K_SPST_switch_L101011MS02Q | SW1 |
| 1 | PDS560-13 D_Schottky_AAK Diode Incorporated | D_PowerDI-5 | D1 |
| 1 | LNJ937W8CRA LED Panasonic Electric Components | LED_0603 | D2 |
| 1 | CDRH105RNP-6R8NC 6.8uH Sumida America Components | Sumida_L_CDRH105R | L1 |
| 1 | C1608X5R1E335K080AC 3.3uF TDK Corporation | C_0603 | C1 |
| 1 | C3216X5R1E475K160AA 4.7uF TDK Corporation | C_1206 | C2 |
| 1 | C4532X5R1E106M250KA 10uF TDK Corporation | C_1812 | C3 |
| 2 | CGB3B1X5R1E105K055AC 1uF TDK Corporation | C_0603 | C4, C6 |
| 2 | C0603C104K3RACTU 0.1uF Kemet | C_0603 | C5, C7 |
| 1 | TPSA106K010R0900 10u AVX Corporation | CP_Tantalum_Case-A_EIA-3216-18_Reflow | C8 |
| 1 | RC0402FR-07100KL 100k Yageo | R_0402 | R1 |
| 1 | RC0402FR-0724KL 24k Yageo | R_0402 | R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0402FR-0769K8L 69.8k Yageo | R_0402 | R3 |
| 11 | RC0603FR-0710KL 10k Yageo | R_0603 | R4, R5, R7, R8, R9, R10, R11, R12 +3 |
| 1 | RC0603FR-071KL 1k Yageo | R_0603 | R6 |
| 18 | RC0603FR-07510RL 510 Yageo | R_0603 | R17, R19, R20, R21, R22, R23, R24, R25 +10 |
Multichannel led driver design files
The KiCad project lives in the rossuthoff/multichannel_led_driver repository on GitHub; these links point at the commit this page was built from.
Multichannel led driver: common questions
How big is the Multichannel led driver PCB?
The Multichannel led driver measures 72.3 × 36.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Multichannel led driver?
69 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Multichannel led driver design files?
From the rossuthoff/multichannel_led_driver repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Multichannel led driver design in my own project?
Yes, under the terms of its GPL-3.0 license, which rossuthoff chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k