Selfdrivingcar
About the Selfdrivingcar PCB
Selfdrivingcar is an open source PCB design by rotyflo, published on GitHub. It is a 2-layer board measuring 84 × 59 mm, with 10 components from 4 distinct parts.
Other key parts include the R_Photo. By type, the board carries 7 modules and 1 connector.
It belongs with the sensors designs in this gallery.
Main components on the Selfdrivingcar
Selfdrivingcar bill of materials (BOM)
10 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | R_Photo | R_LDR_5.0x4.1mm_P3mm_Vertical | A8, A9, A10, A11, A12, A13, A14 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 1k |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 330 |
Selfdrivingcar design files
The KiCad project lives in the rotyflo/selfdrivingcar repository on GitHub; these links point at the commit this page was built from.
Selfdrivingcar: common questions
How big is the Selfdrivingcar PCB?
The Selfdrivingcar measures 84 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Selfdrivingcar?
10 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Selfdrivingcar design files?
From the rotyflo/selfdrivingcar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Selfdrivingcar design in my own project?
The repository has no license, so all rights stay with rotyflo. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956