Ride along module

Rowan-Rocketry·SRAD-Avionics·Ride-Along-Module/pcb/ride-along-module.kicad_pcb

Ride along module layout, top view — open source STM32 board by Rowan-Rocketry

About the Ride along module

Ride along module is an open source STM32 PCB design by Rowan-Rocketry, published on GitHub. It is a 2-layer board measuring 50.3 × 37.9 mm, with 44 components from 27 distinct parts.

Its main chip is the LSM6DSL, from the STM32 family. Other key parts include the MS5607-02BA and TC2185-3.3VxCTTR. By type, the board carries 21 capacitors, 6 resistors, 5 ICs, 4 test points, 3 diodes and 2 connectors.

Main components on the Ride along module

Ride along module bill of materials (BOM)

44 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MS5607-02BA
USBLC6-2SC6
U1
1
LSM6DSL
STM32U545RETxQ
U2
1
TC2185-3.3VxCTTR
U3
1
MS5607-02BA
U4
1
LSM6DSL
U5
1
CONN_01X06_PIN
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_01X06_PIN
Micro_SD_Card
J2
1
LiPo Connector
BT1
1
SW_DPST
SW1
4
TestPoint
TP1, TP2, TP3, TP4
2
LED
D1, D3
1
VS5V0UA1LAMTR
D2
1
2.2uH
L1
1
100NF
10uF
C1
1
10UF
10uF
C2
1
100NF
2.2uF
C3
4
100nF
C4, C14, C19, C21
7
100nF
C5, C6, C9, C10, C11, C12, C13
1
2.2uF
C7
1
1uF
C8
Show 7 more
QtyPartRefs
1
10u
C15
2
1uF
C16, C18
1
0.01uF
C17
1
10uF
C20
2
1k
R1, R6
2
5.1k
R2, R3
2
10k
R4, R5

Ride along module design files

The KiCad project lives in the Rowan-Rocketry/SRAD-Avionics repository on GitHub; these links point at the commit this page was built from.

Ride along module: common questions

What microcontroller does the Ride along module use?

The Ride along module is built around the LSM6DSL, from the STM32 family.

How big is the Ride along module?

The Ride along module measures 50.3 × 37.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ride along module?

44 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ride along module design files?

From the Rowan-Rocketry/SRAD-Avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ride along module design in my own project?

The repository has no license, so all rights stay with Rowan-Rocketry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ride along module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in SRAD-Avionics

Similar boards