Main-Module

Rowan-Rocketry·SRAD-Avionics·Main-Module/pcb/Main-Module.kicad_pcb

Main-Module layout, top view — open source STM32 board by Rowan-Rocketry

About the Main-Module

Main-Module is an open source STM32 PCB design by Rowan-Rocketry, published on GitHub. It is a 4-layer board measuring 76.2 × 48.3 mm, with 49 components from 31 distinct parts.

Its main chip is the STM32H503RBTx, from the STM32 family. Other key parts include the MS5607-02BA, LSM6DSL, MCP73831-2-MC and ADXL375BCCZ. By type, the board carries 17 capacitors, 6 ICs, 4 test points, 4 resistors, 2 diodes and 1 connector.

Main components on the Main-Module

Main-Module bill of materials (BOM)

49 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MS5607-02BA
W25Q128JVS
U1
1
LSM6DSL
MCP130-xxxxTT
U2
1
STM32H503RBTx
U3
1
MCP73831-2-MC
U5
1
MS5607-02BA
U6
1
ADXL375BCCZ
U7
1
CONN_01X06_PIN
Conn_02x10_Odd_Even
J1
1
100nF
CAN_C1
2
4.7uF
CAN_C2, CAN_C3
1
NUP2105L
CAN_D1
1
Conn_01x02_Socket
CAN_J1
2
62
CAN_R1, CAN_R2
1
TCAN332G
CAN_U1
1
SW_DIP_x03
SW1
4
TestPoint
TP1, TP2, TP3, TP4
1
ESDA7P60-1U1M
USB_CR1
1
USB_C_Receptacle_USB2.0_16P
USB_J1
2
5.1k
USB_R1, USB_R2
1
TestPoint
USB_TP1
1
USBLC6-2SC6
USB_U1
Show 11 more
QtyPartRefs
2
LED
D1, D2
2
100NF
100nF
C1, C3
1
10UF
4.7uF
C2
7
100nF
C4, C5, C7, C9, C11, C18, C20
2
2.2uF
C6, C8
3
4.7uF
C10, C14, C16
1
1uF
C12
1
10uF
C19
1
10k
R1
1
2k
R2
2
1k
R3, R4

Main-Module design files

The KiCad project lives in the Rowan-Rocketry/SRAD-Avionics repository on GitHub; these links point at the commit this page was built from.

Main-Module: common questions

What microcontroller does the Main-Module use?

The Main-Module is built around the STM32H503RBTx, from the STM32 family.

How big is the Main-Module?

The Main-Module measures 76.2 × 48.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Main-Module?

49 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Main-Module design files?

From the Rowan-Rocketry/SRAD-Avionics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Main-Module design in my own project?

The repository has no license, so all rights stay with Rowan-Rocketry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main-Module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in SRAD-Avionics

Similar boards