Gb cartridge rom ram batt tht

roybaer·gb_cartridge·gb_cartridge_rom_ram_batt_tht/gb_cartridge_rom_ram_batt_tht.kicad_pcb

Gb cartridge rom ram batt tht PCB layout, top view — open source board by roybaer

About the Gb cartridge rom ram batt tht PCB

Gb cartridge rom ram batt tht is an open source PCB design by roybaer, published on GitHub. It is a 2-layer board measuring 50 × 61 mm, with 9 components from 7 distinct parts.

Other key parts include the 27C512 and HM62256BLFP-7SLT. By type, the board carries 2 ICs, 2 diodes, 2 capacitors, 1 connector, 1 battery holder and 1 resistor.

It belongs with the retro computing designs in this gallery.

From the project

Various PCB designs for Game Boy cartridges

This repository contains various PCB designs for Game Boy cartridges.

The individual designs have the following characteristics:

Board marking | ROM | RAM | RAM backup | Technology | Memory Bank Controller ------------------|--------|---------|----------------------------|------------|-------------------------------- ROM+RAM(+BATT) | 32 KiB | 8 KiB | external battery/capacitor | SMD | none ROM+RAM+BATT | 32 KiB | 8 KiB | coin cell battery holder | SMD | none ROM+RAM+BATT EVAL | 32 KiB | 8 KiB | external battery | THT | none ROM+MBC+RAM+BATT | 1 MiB | 128 KiB | coin cell battery holder | SMD…

Main components on the Gb cartridge rom ram batt tht

27C512 HM62256BLFP-7SLT

Gb cartridge rom ram batt tht bill of materials (BOM)

9 components, 7 distinct parts.

Qty	Part	Footprint	Refs
1	27C512	DIP-28_W15.24mm_Socket	U1
1	HM62256BLFP-7SLT	DIP-28_W15.24mm	U2
1	GB_CART_CONN	GB_CART_EDGE	P1
1	Battery	Pin_Header_Angled_1x02_Pitch2.54mm	BT1
2	D_Schottky	Diode_DO-35_SOD27_Horizontal_RM10	D1, D2
2	100n	C_Disc_D6_P5	C1, C2
1	100k	Resistor_Horizontal_RM15mm	R1

Gb cartridge rom ram batt tht design files

The KiCad project lives in the roybaer/gb_cartridge repository on GitHub; these links point at the commit this page was built from.

Layoutgb_cartridge_rom_ram_batt_tht/gb_cartridge_rom_ram_batt_tht.kicad_pcb

Gb cartridge rom ram batt tht: common questions

How big is the Gb cartridge rom ram batt tht PCB?

The Gb cartridge rom ram batt tht measures 50 × 61 mm, has 2 copper layers and is 1 mm thick.

How many components are on the Gb cartridge rom ram batt tht?

9 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gb cartridge rom ram batt tht design files?

From the roybaer/gb_cartridge repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Gb cartridge rom ram batt tht design in my own project?

The repository has no license, so all rights stay with roybaer. Use it as a reference, and ask the author before reusing the design.

More boards in gb_cartridge

Similar boards