CLK stdln
About the CLK stdln PCB
CLK stdln is an open source PCB design by rraider, published on GitHub under the MIT license. It is a 2-layer board measuring 64 × 67 mm, with 43 components from 16 distinct parts.
Other key parts include the 74LS08, 74LS04 and NE555. By type, the board carries 13 resistors, 11 capacitors, 5 ICs, 4 connectors, 3 transistors and 3 switches.
From the project
Entwicklung eines turingvollständigen, primitiven Microcontroller in der Software Digital
Entwicklung eines turingvollständigen, primitiven Microcontroller in der Software Digital
Sponsored by JLCPCB https://jlcpcb.com/RAT
Main components on the CLK stdln
CLK stdln bill of materials (BOM)
43 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS08 | DIP-14_W7.62mm_Socket | U1 |
| 1 | 74LS04 | DIP-14_W7.62mm_Socket | U2 |
| 3 | NE555 | DIP-8_W10.16mm | U3, U4, U5 |
| 3 | BC547 | TO-92_Inline | Q1, Q2, Q3 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_Coaxial | SMA_Amphenol_901-144_Vertical | J2 |
| 1 | Conn_01x02 | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J3 |
| 1 | Conn_02x20_Counter_Clockwise | PinSocket_2x20_P2.54mm_Horizontal | J4 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | R_POT | Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | SW_Push | Push_E-Switch_KS01Q01 | SW1 |
| 2 | SW_SPDT | SW_CuK_JS202011CQN_DPDT_Straight | SW2, SW3 |
| 2 | LED | LED_D5.0mm | D1, D274 |
| 9 | C | C_0805_2012Metric | C1, C2, C3, C4, C5, C7, C8, C9 +1 |
| 2 | CP | C_0805_2012Metric | C6, C17 |
| 13 | R | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +5 |
CLK stdln design files
The KiCad project lives in the rraider/Seminarkurs2021 repository on GitHub; these links point at the commit this page was built from.
CLK stdln: common questions
How big is the CLK stdln PCB?
The CLK stdln measures 64 × 67 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CLK stdln?
43 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the CLK stdln design files?
From the rraider/Seminarkurs2021 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CLK stdln design in my own project?
Yes, under the terms of its MIT license, which rraider chose for the repository.
More boards in Seminarkurs2021
SPU2
400 × 300 mm736 parts2LMIT7
GFX
142 × 122 mm302 parts4LMIT7
MARMEM
142 × 100.2 mm86 parts2LMIT7
RAM
142 × 62 mm41 parts4LMIT7
IR
142 × 73.7 mm40 parts2LMIT7
CLK
142 × 60 mm39 parts2LMIT7
ADDR
469.5 × 64.3 mm38 parts2LMIT7
ALU
119 × 96 mm31 parts2LMIT7
DATA
469.5 × 64.3 mm27 parts2LMIT7
MIM
142.1 × 108 mm22 parts2LMIT7
ROM
142 × 58.3 mm11 parts2LMIT7