ThermoDeviceLogger

rubenelportero·MakingDevices·Thermo-device-logger/Kicad/ThermoDeviceLogger/ThermoDeviceLogger.kicad_pcb

ThermoDeviceLogger PCB layout, top view — open source PIC board by rubenelportero

About the ThermoDeviceLogger PCB

ThermoDeviceLogger is an open source PIC PCB design by rubenelportero, published on GitHub. It is a 2-layer board measuring 40 × 30 mm, with 31 components from 16 distinct parts.

Its main chip is the PIC18F, from the PIC family. Other key parts include the TC1108-3.3VDBTR and MAX31855KASA+. By type, the board carries 8 capacitors, 6 resistors, 4 ICs, 3 connectors, 3 diodes and 2 LEDs.

From the project

https://makingdevices.com/

********************************************************************************************* Pic Bytes Micro

Pic Bytes Micro is an 8-bit portable arcade with a monochromatic LED screen. The project was chosen in order to learn about different engineering fields: Basic electronics, microcontrollers and programming. Some games are developed for the hardware: Snake, Tetris, Arkanoid...

Main components on the ThermoDeviceLogger

ThermoDeviceLogger bill of materials (BOM)

31 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TC1108-3.3VDBTR
IC1
2
MAX31855KASA+
IC2, IC3
1
PIC18F
U1
1
12Mhz
Y1
1
Type - C
J1
1
TC2030-MCP-NL
J2
1
4-terminal
J3
2
Ferrite
LFB1, LFB2
2
Green
LED1, LED2
3
ZLLS410TA
D1, D2, D3
2
742792005
FB1, FB2
4
1uF
C1, C2, C3, C4
2
22pF
C5, C6
2
100nF
C7, C8
4
10k
R1, R4, R5, R6
2
220
R2, R3

ThermoDeviceLogger design files

The KiCad project lives in the rubenelportero/MakingDevices repository on GitHub; these links point at the commit this page was built from.

ThermoDeviceLogger: common questions

What microcontroller does the ThermoDeviceLogger use?

The ThermoDeviceLogger is built around the PIC18F, from the PIC family.

How big is the ThermoDeviceLogger PCB?

The ThermoDeviceLogger measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ThermoDeviceLogger?

31 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ThermoDeviceLogger design files?

From the rubenelportero/MakingDevices repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ThermoDeviceLogger design in my own project?

The repository has no license, so all rights stay with rubenelportero. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ThermoDeviceLogger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in MakingDevices

Similar boards