RHT device
rubenelportero·MakingDevices·RHT-device/v0.1/Kicad/RHT device/RHT device.kicad_pcb
About the RHT device PCB
RHT device is an open source PIC PCB design by rubenelportero, published on GitHub. It is a 4-layer board measuring 40 × 48.4 mm, with 28 components from 13 distinct parts.
Its main chip is the PIC18LF14K50-I_SO, from the PIC family. Other key parts include the HTU20D, CC56-12EWA and CH075-2032. By type, the board carries 14 resistors, 4 ICs, 4 transistors, 3 capacitors, 1 switch and 1 LED.
From the project
https://makingdevices.com/
********************************************************************************************* Pic Bytes Micro
Pic Bytes Micro is an 8-bit portable arcade with a monochromatic LED screen. The project was chosen in order to learn about different engineering fields: Basic electronics, microcontrollers and programming. Some games are developed for the hardware: Snake, Tetris, Arkanoid...
Main components on the RHT device
RHT device bill of materials (BOM)
28 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC18LF14K50-I_SO | SSOP-20_5.3x7.2mm_P0.65mm | IC1 |
| 1 | HTU20D | SON50P250X250X100-9N-D | IC2 |
| 1 | CC56-12EWA | CA56-12EWA | U1 |
| 1 | CH075-2032 | CH0752032 | U2 |
| 4 | SMMBT5551LT1G | SOT96P237X111-3N | Q1, Q2, Q3, Q4 |
| 1 | B3F-4050-SamacSys_Parts | B3F4050 | S1 |
| 1 | LTST-C171GKT | LEDC2012X90N | LED1 |
| 1 | ZLLS410TA | SOD2513X120N | D1 |
| 3 | 100nF | CAPC2012X140N | C1, C2, C3 |
| 5 | 10k | RESC2012X75N | R1, R11, R12, R13, R14 |
| 4 | 4k7 | RESC2012X75N | R2, R4, R6, R8 |
| 4 | 100 | RESC2012X75N | R3, R5, R7, R9 |
| 1 | 220 | RESC2012X75N | R10 |
RHT device design files
The KiCad project lives in the rubenelportero/MakingDevices repository on GitHub; these links point at the commit this page was built from.
RHT device: common questions
What microcontroller does the RHT device use?
The RHT device is built around the PIC18LF14K50-I_SO, from the PIC family.
How big is the RHT device PCB?
The RHT device measures 40 × 48.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the RHT device?
28 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RHT device design files?
From the rubenelportero/MakingDevices repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the RHT device design in my own project?
The repository has no license, so all rights stay with rubenelportero. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RHT device without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in MakingDevices
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379