MCB-110-A

Rudolfs-Pakalns·Line-Follower·Line_Follower_PCBs/MCB/MCB-110-A/MCB-110-A.kicad_pcb

MCB-110-A PCB layout, top view — open source STM32 board by Rudolfs-Pakalns

About the MCB-110-A PCB

MCB-110-A is an open source STM32 PCB design by Rudolfs-Pakalns, published on GitHub. It is a 2-layer board measuring 116.3 × 36 mm, with 39 components from 27 distinct parts.

Its main chip is the STM32G071GBU, from the STM32 family. Other key parts include the DRV8833PWP and TPSM863253RDXR. By type, the board carries 14 capacitors, 8 resistors, 7 connectors, 3 ICs, 3 switches and 3 diodes.

It belongs with the robotics & motion designs in this gallery.

From the project

My personal line follower robot project

Main components on the MCB-110-A

MCB-110-A bill of materials (BOM)

39 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DRV8833PWP
U1
1
STM32G071GBU
U3
1
TPSM863253RDXR
U4
1
MOT A
J1
1
MOT B
J2
1
PROGRAM
J3
1
BT
J4
1
Conn_01x02_Pin
J5
1
Signals
J6
1
Power
J7
1
Fuse
F1
1
USER
SW1
1
RESET
SW3
1
SW_Nidec_CAS-120A1
SW4
1
ON
D1
1
RX_LED
D3
1
TX_LED
D4
6
100n
C1, C2, C3, C4, C6, C16
2
10u
C5, C12
2
10n
C7, C14
Show 7 more
QtyPartRefs
1
22u
C9
1
220u
C11
1
2u2
C13
1
470uF
C17
2
10k
R1, R15
1
12k
R2
5
1k
R3, R4, R5, R10, R11

MCB-110-A design files

The KiCad project lives in the Rudolfs-Pakalns/Line-Follower repository on GitHub; these links point at the commit this page was built from.

MCB-110-A: common questions

What microcontroller does the MCB-110-A use?

The MCB-110-A is built around the STM32G071GBU, from the STM32 family.

How big is the MCB-110-A PCB?

The MCB-110-A measures 116.3 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MCB-110-A?

39 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MCB-110-A design files?

From the Rudolfs-Pakalns/Line-Follower repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the MCB-110-A design in my own project?

The repository has no license, so all rights stay with Rudolfs-Pakalns. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MCB-110-A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Line-Follower

Similar boards