SMB - 100 - A
Rudolfs-Pakalns·Line-Follower·Line_Follower_PCBs/SMB/SMB-100-A/SMB-100-A.kicad_pcb
About the SMB - 100 - A PCB
SMB - 100 - A is an open source PCB design by Rudolfs-Pakalns, published on GitHub. It is a 2-layer board measuring 92 × 49.5 mm, with 39 components from 10 distinct parts.
Other key parts include the QRE1113 and MCP6001U. By type, the board carries 15 resistors, 10 ICs, 5 diodes and 4 connectors.
It belongs with the robotics & motion designs in this gallery.
From the project
My personal line follower robot project
Main components on the SMB - 100 - A
SMB - 100 - A bill of materials (BOM)
39 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | QRE1113 | OnSemi_CASE100AQ | U1, U3, U4, U6, U8 |
| 5 | MCP6001U | SOT-23-5_HandSoldering | U2, U5, U7, U9, U10 |
| 1 | Signals | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | Power | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 2 | Conn_01x01_Pin | PinHeader_1x01_P1.00mm_Vertical | J3, J4 |
| 5 | 10k | Potentiometer_Bourns_TC33X_Vertical | RV1, RV2, RV3, RV4, RV5 |
| 5 | RED | LED_1206_3216Metric | D1, D2, D3, D4, D5 |
| 5 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R6, R9, R11 |
| 5 | 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5, R7, R10, R13 |
| 5 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R8, R12, R14, R15 |
SMB - 100 - A design files
The KiCad project lives in the Rudolfs-Pakalns/Line-Follower repository on GitHub; these links point at the commit this page was built from.
SMB - 100 - A: common questions
How big is the SMB - 100 - A PCB?
The SMB - 100 - A measures 92 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SMB - 100 - A?
39 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SMB - 100 - A design files?
From the Rudolfs-Pakalns/Line-Follower repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SMB - 100 - A design in my own project?
The repository has no license, so all rights stay with Rudolfs-Pakalns. Use it as a reference, and ask the author before reusing the design.
More boards in Line-Follower
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979