Clavis
rudranshgoel1·clavis·PCB/Clavis.kicad_pcb
About the Clavis PCB
Clavis is an open source RP2040/RP2350 PCB design by rudranshgoel1, published on GitHub under the MIT license. It is a 2-layer board measuring 330 × 108.5 mm, with 125 components from 11 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 62 switches, 62 diodes and 1 module.
It belongs with the keyboards designs in this gallery.
From the project
- RotaryEncoder for Volume Control - 61 keys - Raspberry Pi Pico - Customised layout - KMK firmware - Clavis Branded PCB - Custom case
- RotaryEncoder for Volume Control - 61 keys - Raspberry Pi Pico - Customised layout - KMK firmware - Clavis Branded PCB - Custom case
link to full 3d thing- https://cad.onshape.com/documents/4ed86aec979a191abbaea04f/w/0de3f3de07dd510f46e22fad/e/19a866b01119f1b2fa2c9c33?renderMode=0&uiState=69c921f1b2c317188620b060
A special thanks to Anay and Aditya who are helping me to make my projects better. Love them so much!

Main components on the Clavis
Clavis bill of materials (BOM)
125 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_THT | A1 |
| 46 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +38 |
| 1 | SW_Push | SW_Cherry_MX_2.00u_PCB | SW14 |
| 2 | SW_Push | SW_Cherry_MX_1.50u_PCB | SW15, SW28 |
| 1 | SW_Push | SW_Cherry_MX_1.75u_PCB | SW29 |
| 2 | SW_Push | SW_Cherry_MX_2.25u_PCB | SW41, SW42 |
| 1 | SW_Push | SW_Cherry_MX_2.75u_PCB | SW53 |
| 7 | SW_Push | SW_Cherry_MX_1.25u_PCB | SW54, SW55, SW56, SW58, SW59, SW60, SW61 |
| 1 | SW_Push | SW_Cherry_MX_6.25u_PCB | SW57 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW62 |
| 62 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +54 |
Clavis design files
The KiCad project lives in the rudranshgoel1/clavis repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Clavis.kicad_pcb
- SchematicPCB/Clavis.kicad_sch
- BOMBOM.csv
Clavis: common questions
What microcontroller does the Clavis use?
The Clavis is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Clavis PCB?
The Clavis measures 330 × 108.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clavis?
125 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Clavis design files?
From the rudranshgoel1/clavis repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Clavis design in my own project?
Yes, under the terms of its MIT license, which rudranshgoel1 chose for the repository.
Can I test firmware for the Clavis without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k