Rukey
rukai·rukey·PCB_main/Sofle_Pico.kicad_pcb
About the Rukey PCB
Rukey is an open source RP2040/RP2350 PCB design by rukai, published on GitHub. It is a 2-layer board measuring 166 × 103 mm, with 68 components from 5 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 32 switches, 32 diodes, 3 connectors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
keyboard?
This was designed quickly as my personal keyboard, I would like to make this a properly documented project that others can build but don't have the capacity at the moment.
I used the sofle pico as a base but changed pretty much everything in order to recreate the moonlander but with the goal of being a budget build.

Main components on the Rukey
Rukey bill of materials (BOM)
68 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pico | RaspberryPi_Pico_SMD | U2 |
| 2 | Conn_02x08_Top_Bottom | PinHeader_2x08_P2.00mm_Vertical | J1, J2 |
| 1 | Conn_02x03 | PinHeader_2x03_P2.00mm_Vertical | J3 |
| 32 | SW_PUSH | Cherry_MX_DS_Hotswap_v3.5.4 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +24 |
| 32 | 1N4148W D | D_SOD-123_DO-35_Hybrid_DoubleSided_V2 | D1, D2, D3, D4, D5, D6, D7, D8 +24 |
Rukey design files
The KiCad project lives in the rukai/rukey repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB_main/Sofle_Pico.kicad_pcb
- SchematicPCB_main/Sofle_Pico.kicad_sch
Rukey: common questions
What microcontroller does the Rukey use?
The Rukey is built around the Pico, from the RP2040/RP2350 family.
How big is the Rukey PCB?
The Rukey measures 166 × 103 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rukey?
68 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rukey design files?
From the rukai/rukey repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rukey design in my own project?
The repository has no license, so all rights stay with rukai. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rukey without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k