IoT-Gateway

RWTH-EBC·IoT-Gateway·Schematic/IoTgate.kicad_pcb

IoT-Gateway PCB layout, top view — open source RP2040/RP2350 board by RWTH-EBC

About the IoT-Gateway PCB

IoT-Gateway is an open source RP2040/RP2350 PCB design by RWTH-EBC, published on GitHub under the MIT license. It is a 2-layer board measuring 106 × 56 mm, with 39 components from 24 distinct parts.

Its main chip is the ESP-32-PICO-KIT-V4, from the RP2040/RP2350 family. Other key parts include the LM3405-5.0, REF102AU, ds1302module, xy-017 and OPA344PA. By type, the board carries 14 resistors, 9 ICs, 8 capacitors, 7 connectors and 1 transistor.

It belongs with the iot & wireless designs in this gallery.

From the project

This repository contains the first development of IoT gateways for building automation systems at the Institute for Energy Efficient Buildings and Indoor Climate (EBC) and was presented at the ISARC conference 2019.

DOI: https://doi.org/10.22260/ISARC2019/0012

This project was funded by the European regional development fund (ERDF), [grant numbers EFRE-0800527, KEU-1-006A]

IoT-Gateway, from the project README
From the project README

Main components on the IoT-Gateway

LM3405-5.0ESP-32-PICO-KIT-V4REF102AUds1302modulexy-017OPA344PAOPA705PAXTR117

IoT-Gateway bill of materials (BOM)

39 components, 24 distinct parts.

QtyPartRefs
1
LM3405-5.0
U1
1
ESP-32-PICO-KIT-V4
U2
1
REF102AU
U3
1
ds1302module
U4
1
xy-017
U5
2
OPA344PA
U6, U7
1
OPA705PA
U8
1
XTR117
U9
1
BC337
Q1
1
Conn_01x02
J1
4
Conn_01x03
J3, J4, J5, J6
2
Conn_01x02
J8, J9
1
220n
C1
4
100n
C2, C6, C7, C8
3
1μF
C3, C4, C5
2
2MΩ
R1, R3
2
1MΩ
R2, R4
4
10kΩ
R5, R6, R7, R9
1
15kΩ
R8
1
680 Ω
R10
Show 4 more
QtyPartRefs
1
22kΩ
R11
1
3.3kΩ
R12
1
45.3Ω
R13
1
33kΩ
R14

IoT-Gateway design files

The KiCad project lives in the RWTH-EBC/IoT-Gateway repository on GitHub; these links point at the commit this page was built from.

IoT-Gateway: common questions

What microcontroller does the IoT-Gateway use?

The IoT-Gateway is built around the ESP-32-PICO-KIT-V4, from the RP2040/RP2350 family.

How big is the IoT-Gateway PCB?

The IoT-Gateway measures 106 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IoT-Gateway?

39 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the IoT-Gateway design files?

From the RWTH-EBC/IoT-Gateway repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the IoT-Gateway design in my own project?

Yes, under the terms of its MIT license, which RWTH-EBC chose for the repository.

Can I test firmware for the IoT-Gateway without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards