2 open source boards using the OPA705PA
Real designs built with the OPA705PA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Ee115-capstone
tsaimatthew
115.8 × 98.6 mm187 parts2LNo license0RP2040/RP2350
IoT-Gateway
RWTH-EBC
106 × 56 mm39 parts2LMIT0
The OPA705PA in open source designs
The gallery holds 2 open source boards using the OPA705PA from 2 GitHub repositories; a typical one measures about 110.9 × 77.3 mm and carries around 113 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Ee115-capstone by tsaimatthew.
Microcontrollers on boards using the OPA705PA
What boards using the OPA705PA are built for
OPA705PA: common questions
Where can I find a OPA705PA reference design?
Each of the 2 boards on this page is a real design using the OPA705PA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OPA705PA use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the OPA705PA?
The median is 110.9 × 77.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the OPA705PA?
By GitHub stars, Ee115-capstone by tsaimatthew, with 0 stars.
Can I simulate one of these boards using the OPA705PA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.