HardLabs

AdmAIre

rxiliv·admAIre·hardware/pcb/admaire-electrical_schematic.kicad_sch

This repository ships a schematic but no board layout.

About the AdmAIre PCB

AdmAIre is an open source ESP32 PCB design by rxiliv, published on GitHub under the CC-BY-NC-4.0 license. It is a board, with 7 components from 6 distinct parts.

Its main chip is the ESP32-S3-Sense-Xiao, from the ESP32 family. Other key parts include the MAX98357A, Lipo_Battery and Speaker 1W. By type, the board carries 4 ICs, 2 resistors and 1 switch.

It belongs with the audio, iot & wireless and power & battery designs in this gallery.

From the project

Analyzer of surroundings and obstacles detector for blind and visually impaired people, in the form of a pair of glasses.

AdmAIre is a cutting-edge wearable electronic device, in the form of a pair of simple glasses, designed to enhance the autonomy and safety of blind or visually impaired individuals. Through the integration of artificial intelligence and computer vision, the device analyzes the surrounding environment in real-time, providing interactive and intuitive voice assistance.

Main components on the AdmAIre

ESP32-S3-Sense-XiaoMAX98357ALipo_BatterySpeaker 1W

AdmAIre bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-Sense-Xiao
U1
1
MAX98357A
U2
1
Lipo_Battery
U3
1
Speaker 1W
U4
1
Switch
SW1
2
100K
R1, R2

AdmAIre design files

The KiCad project lives in the rxiliv/admAIre repository on GitHub; these links point at the commit this page was built from.

AdmAIre: common questions

What microcontroller does the AdmAIre use?

The AdmAIre is built around the ESP32-S3-Sense-Xiao, from the ESP32 family.

How many components are on the AdmAIre?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AdmAIre design files?

From the rxiliv/admAIre repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the AdmAIre design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the AdmAIre without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards