Keyboard for me
RyanBran888·keyboard-for-me·keyboard meow/keyboard meow.kicad_pcb
About the Keyboard for me PCB
Keyboard for me is an open source RP2040/RP2350 PCB design by RyanBran888, published on GitHub under the MIT license. It is a 2-layer board measuring 368.3 × 132 mm, with 87 components from 3 distinct parts.
Its main chip is the RASPBERRY_PI_PICO, from the RP2040/RP2350 family. By type, the board carries 43 switches, 43 diodes and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
Im ryan i wanted to make a keybaord so i made a keyboard
Im ryan i wanted to make a keybaord so i made a keyboard
it has buttons so i can type on the keyboard and they are shapped weirdly because i wanted too make them like that
Main components on the Keyboard for me
Keyboard for me bill of materials (BOM)
87 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RASPBERRY_PI_PICO | RASPBERRY_PI_PICO | U1 |
| 43 | SW_Push_45deg | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +35 |
| 43 | D | DIOAD753W49L380D172B | D1, D2, D3, D4, D5, D6, D7, D8 +35 |
Keyboard for me design files
The KiCad project lives in the RyanBran888/keyboard-for-me repository on GitHub; these links point at the commit this page was built from.
Keyboard for me: common questions
What microcontroller does the Keyboard for me use?
The Keyboard for me is built around the RASPBERRY_PI_PICO, from the RP2040/RP2350 family.
How big is the Keyboard for me PCB?
The Keyboard for me measures 368.3 × 132 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keyboard for me?
87 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keyboard for me design files?
From the RyanBran888/keyboard-for-me repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Keyboard for me design in my own project?
Yes, under the terms of its MIT license, which RyanBran888 chose for the repository.
Can I test firmware for the Keyboard for me without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k