Keeb-Keyboard
ryaneditraj·Keeb-Keyboard·PCB FILES/keyboard.kicad_pcb
About the Keeb-Keyboard PCB
Keeb-Keyboard is an open source RP2040/RP2350 PCB design by ryaneditraj, published on GitHub under the MIT license. It is a 2-layer board measuring 328.5 × 100.5 mm, with 134 components from 12 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 64 switches, 64 diodes and 1 module.
It belongs with the keyboards designs in this gallery.
From the project
I'm Building a keyboard for hackclub KEEB YSWS
A 64-key open-source mechanical keyboard: an ANSI 60% layout, a 4-key arrow cluster, a Raspberry Pi Pico, and a glue-in case. The schematic, PCB, Gerbers, and STEP file are the whole project.
Built for Hack Club KEEB, a you-ship-we-ship mechanical keyboard project. This was Ryan Editraj's first PCB: a 60% he extended with arrow keys, routed in KiCad, with the Pico soldered on the front and the case modeled in Onshape.

Main components on the Keeb-Keyboard
Keeb-Keyboard bill of materials (BOM)
134 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 4 | SW_stab | STAB_MX_2u | ST14, ST41, ST42, ST53 |
| 1 | SW_stab | STAB_MX_6.25u | ST58 |
| 50 | SW_Push | SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +42 |
| 1 | SW_Push | SW_Cherry_MX_PCB_2.00u | SW14 |
| 2 | SW_Push | SW_Cherry_MX_PCB_1.50u | SW15, SW28 |
| 1 | SW_Push | SW_Cherry_MX_PCB_1.75u | SW29 |
| 2 | SW_Push | SW_Cherry_MX_PCB_2.25u | SW41, SW42 |
| 1 | SW_Push | SW_Cherry_MX_PCB_2.75u | SW53 |
| 6 | SW_Push | SW_Cherry_MX_PCB_1.25u | SW55, SW56, SW57, SW59, SW60, SW61 |
| 1 | SW_Push | SW_Cherry_MX_PCB_6.25u | SW58 |
| 64 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +56 |
Keeb-Keyboard design files
The KiCad project lives in the ryaneditraj/Keeb-Keyboard repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB FILES/keyboard.kicad_pcb
- SchematicPCB FILES/keyboard.kicad_sch
Keeb-Keyboard: common questions
What microcontroller does the Keeb-Keyboard use?
The Keeb-Keyboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Keeb-Keyboard PCB?
The Keeb-Keyboard measures 328.5 × 100.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keeb-Keyboard?
134 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Keeb-Keyboard design files?
From the ryaneditraj/Keeb-Keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Keeb-Keyboard design in my own project?
Yes, under the terms of its MIT license, which ryaneditraj chose for the repository.
Can I test firmware for the Keeb-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k