Universal-RF-Controller

RyanWillie·Universal-RF-Controller·KiCad/Universal Controller Mk1.kicad_pcb

Universal-RF-Controller PCB layout, top view — open source AVR/Arduino board by RyanWillie

About the Universal-RF-Controller PCB

Universal-RF-Controller is an open source AVR/Arduino PCB design by RyanWillie, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 124 × 64 mm, with 12 components from 10 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the COM-09032. By type, the board carries 4 connectors, 3 capacitors, 2 ICs, 2 switches and 1 module.

It belongs with the rf & radio, displays & leds and sensors designs in this gallery.

From the project

A universal RF controller powered by Arduino Nano and NRF24L01 transceiver

- Computer Science - Programming the RF Controller and creating/training the machine learning algorithms that will drive the hexapod. - Electrical Engineering - Determining the electrical requirements, designing the circuit and PCBs, Soldering the components - 3D Printing - The enclosures for both the RF Controller and the Hexapod robot are designed within Fusion360 and 3D printed using a few different materials

Universal-RF-Controller, from the project README
From the project README

Main components on the Universal-RF-Controller

Universal-RF-Controller bill of materials (BOM)

12 components, 10 distinct parts.

QtyPartRefs
2
COM-09032
U1, U2
1
Arduino_Nano_v3.x
A1
1
MPU6050 Breakout
J1
1
NRF24L01+ Breakout
J2
1
OLED
J3
1
Battery Connector
J6
1
100SP1T1B4M2QE
S1
1
Rotary_Encoder_Switch
SW1
2
200nF
C1, C2
1
10uF
C3

Universal-RF-Controller design files

The KiCad project lives in the RyanWillie/Universal-RF-Controller repository on GitHub; these links point at the commit this page was built from.

Universal-RF-Controller: common questions

What microcontroller does the Universal-RF-Controller use?

The Universal-RF-Controller is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Universal-RF-Controller PCB?

The Universal-RF-Controller measures 124 × 64 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Universal-RF-Controller?

12 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Universal-RF-Controller design files?

From the RyanWillie/Universal-RF-Controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Universal-RF-Controller design in my own project?

Yes, under the terms of its CC0-1.0 license, which RyanWillie chose for the repository.

Can I test firmware for the Universal-RF-Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards