WiFi Jammer Master+Power Board
ryonsherman·arduino-wifi-jammer·pcb/master/master/master.kicad_pcb
About the WiFi Jammer Master+Power Board
WiFi Jammer Master+Power Board is an open source PCB design by ryonsherman, published on GitHub under the MIT license. It is a 2-layer board measuring 42.4 × 52.5 mm, with 8 components from 7 distinct parts.
Other key parts include the LM2596. By type, the board carries 3 connectors, 2 ICs, 2 resistors and 1 capacitor.
It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.
From the project
Arduino WiFi jammer: master swarm controller coordinating multiple NRF24L01 slave transmitters for multi-channel frequency transmission.
Using NRF24L01+ socket adapter boards (not custom PCB): - Adapters have onboard 3.3V LDO, LED, decoupling caps - Accept 5V input - Mount on perfboard or breadboard at front wall - Connect to Slave Carriers via wire wrap
All SPI signals route from right edge (pins 9-13):
- Input: 36V from batteries (4× 9V in series) - Output: 5V (adjustable via pot) - Max input: 40V (36V is within spec) - Max current: 3A (sufficient for system)
Main components on the WiFi Jammer Master+Power Board
WiFi Jammer Master+Power Board bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | — | PinSocket_2x15_P2.54mm_Vertical | U1 |
| 1 | LM2596 | LM2596_Socket | U2 |
| 1 | 36V_IN | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 5V_OUT | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | — | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | — | CP_Radial_D5.0mm_P2.00mm | C1 |
| 2 | — | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
WiFi Jammer Master+Power Board design files
The KiCad project lives in the ryonsherman/arduino-wifi-jammer repository on GitHub; these links point at the commit this page was built from.
WiFi Jammer Master+Power Board: common questions
How big is the WiFi Jammer Master+Power Board?
The WiFi Jammer Master+Power Board measures 42.4 × 52.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WiFi Jammer Master+Power Board?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the WiFi Jammer Master+Power Board design files?
From the ryonsherman/arduino-wifi-jammer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the WiFi Jammer Master+Power Board design in my own project?
Yes, under the terms of its MIT license, which ryonsherman chose for the repository.
More boards in arduino-wifi-jammer
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k