23 open source boards using the LM2596

Real designs built with the LM2596, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the LM2596

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the LM2596 connects to, and the resistors, capacitors and other passives placed on it.

  • The ON/OFF pin is tied to GND on 7 of 8 designs.
GNDpin 2, 3Connected to: GND 63% · a signal 30%
ON/OFFpin 5Connected to: GND 88%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Frankenso by rusefi, Front display by slomkowski, Gps animal by ElectronicCats and 2sBatteryCharger by jsjolund.

The LM2596 in open source designs

The gallery holds 23 open source boards using the LM2596 from 20 GitHub repositories; a typical one measures about 127.6 × 89.7 mm and carries around 54 components.

91% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.

The most starred is Frankenso by rusefi.

LM2596: common questions

Where can I find a LM2596 reference design?

Each of the 23 boards on this page is a real design using the LM2596. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM2596 ON/OFF pin connected?

The ON/OFF pin is tied to GND on 7 of 8 designs. Counted from the KiCad layouts of 20 open source designs using the LM2596.

What parts are used alongside the LM2596?

The FT232RL, ITEAD_HC-0X, LM2937, MAX31855KASA and MAX9926/9927 appear in the most repositories here.

Which microcontrollers do boards using the LM2596 use?

Most are built on ESP32 (6), ESP8266 (3), STM32 (3) and Microchip SAM (2).

How big is a typical board using the LM2596?

The median is 127.6 × 89.7 mm, and 91% are two-layer designs.

What is the most popular open source board using the LM2596?

By GitHub stars, Frankenso by rusefi, with 48 stars.

Can I simulate one of these boards using the LM2596 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part