Teensy carrier
About the Teensy carrier PCB
Teensy carrier is an open source NXP PCB design by s-bear, published on GitHub under the MIT license. It is a 2-layer board measuring 56 × 34 mm, with 5 components from 5 distinct parts.
Its main chip is the Teensy3.2, from the NXP family. Other key parts include the LM1084-5.0. By type, the board carries 3 connectors and 2 ICs.
It belongs with the displays & leds designs in this gallery.
From the project
UV/RGB LED display
Main components on the Teensy carrier
Teensy carrier bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Teensy3.2 | Teensy30_31_32_LC | U1 |
| 1 | LM1084-5.0 | TO-263-3_TabPin2 | U2 |
| 1 | Conn_01x02_Male | TerminalBlock_DECA-MB312-254-2 | J1 |
| 1 | Conn_01x15_Female | Hirose_FH19SC-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal | J2 |
| 1 | Conn_01x02_Female | TerminalBlock_DECA-MB312-254-2 | J3 |
Teensy carrier design files
The KiCad project lives in the s-bear/UVTV repository on GitHub; these links point at the commit this page was built from.
Teensy carrier: common questions
What microcontroller does the Teensy carrier use?
The Teensy carrier is built around the Teensy3.2, from the NXP family.
How big is the Teensy carrier PCB?
The Teensy carrier measures 56 × 34 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Teensy carrier?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Teensy carrier design files?
From the s-bear/UVTV repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Teensy carrier design in my own project?
Yes, under the terms of its MIT license, which s-bear chose for the repository.
Can I test firmware for the Teensy carrier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in UVTV
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL64
MicroCoreLabs
39.3 × 61.8 mm9 parts4LNo license532
NXPROM Emulator
21.5 × 37.1 mm5 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532
NXPXTMAX
81 × 46 mm14 parts4LNo license532