Pathfinder
SabhyaAggarwal·Pathfinder·PCB/Pathfinder.kicad_pcb
About the Pathfinder PCB
Pathfinder is an open source RP2040/RP2350 PCB design by SabhyaAggarwal, published on GitHub. It is a 2-layer board measuring 60.4 × 39.9 mm, with 14 components from 6 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 6 resistors, 4 diodes, 3 switches and 1 IC.
From the project
- Press Button 1 → Blue LED ON, RGB shows blue
- Press Button 1 → Blue LED ON, RGB shows blue
- Press Button 2 within 2 seconds of Button 1 → Green LED ON, RGB shows green
- Press Button 1 AND Button 2 within 2 seconds of each other → Blue + Green LEDs ON, RGB shows cyan (blue + green)
- Hold Button 3 → Red LED ON, RGB shows red
- Combine Button 3 + Button 1 → Red + Blue LEDs ON, RGB shows magenta (red + blue)
Main components on the Pathfinder
Pathfinder bill of materials (BOM)
14 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 3 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3 |
| 3 | LED | LED_D5.0mm | D1, D2, D3 |
| 1 | LED_RGBA | LED_D5.0mm-4_RGB | D4 |
| 2 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4 |
| 4 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R5, R6 |
Pathfinder design files
The KiCad project lives in the SabhyaAggarwal/Pathfinder repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Pathfinder.kicad_pcb
- SchematicPCB/Pathfinder.kicad_sch
- BOMPRODUCTION/BOM.csv
Pathfinder: common questions
What microcontroller does the Pathfinder use?
The Pathfinder is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Pathfinder PCB?
The Pathfinder measures 60.4 × 39.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pathfinder?
14 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pathfinder design files?
From the SabhyaAggarwal/Pathfinder repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pathfinder design in my own project?
The repository has no license, so all rights stay with SabhyaAggarwal. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pathfinder without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k