ColorSensingLEDStrip
sabpereira·ColorSensingLEDStrip·hardware/ColorSensingLEDStrip.kicad_pcb
About the ColorSensingLEDStrip PCB
ColorSensingLEDStrip is an open source AVR/Arduino PCB design by sabpereira, published on GitHub. It is a 2-layer board measuring 99.1 × 68.6 mm, with 10 components from 9 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the Adafruit_AS7341 and OLED. By type, the board carries 4 capacitors, 2 ICs, 2 connectors, 1 module and 1 switch.
It belongs with the displays & leds designs in this gallery.
From the project
This repository conatins the documentation and relevant files for the Color Sensing LED Strip controller, a controller that allows for the user to scan a desired color to set an LED strip to the color, as well as allowing other methods of user input.
This repository conatins the documentation and relevant files for the Color Sensing LED Strip controller, a controller that allows for the user to scan a desired color to set an LED strip to the color, as well as allowing other methods of user input.
The user interface displays text and menus OLED ".96 display, with selections made through the use of a rotary encoder. The color spectrometer Adafruit AS7341 is used to scan the desired color. Adafruit DotStars are used for the LEDs.

Main components on the ColorSensingLEDStrip
ColorSensingLEDStrip bill of materials (BOM)
10 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Adafruit_AS7341 | Adafruit_AS7341_PinSocket | U1 |
| 1 | OLED | OLED_0.96 | U2 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | Barrel_Jack_Switch | Barrel_Jack_5.5mmODx2.1mmID_PJ-202A | J1 |
| 1 | 4-Wire Screw Terminal | PhoenixContact_MCV_1,5_4-G-3.5_1x04_P3.50mm_Vertical | J2 |
| 1 | Rotary_Encoder_Switch | RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW1 |
| 2 | 0.1 uf | C_Rect_L4.0mm_W2.5mm_P2.50mm | C1, C4 |
| 1 | 100 uf | CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 1000 uf | CP_Radial_D8.0mm_P3.50mm | C3 |
ColorSensingLEDStrip design files
The KiCad project lives in the sabpereira/ColorSensingLEDStrip repository on GitHub; these links point at the commit this page was built from.
ColorSensingLEDStrip: common questions
What microcontroller does the ColorSensingLEDStrip use?
The ColorSensingLEDStrip is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the ColorSensingLEDStrip PCB?
The ColorSensingLEDStrip measures 99.1 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ColorSensingLEDStrip?
10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ColorSensingLEDStrip design files?
From the sabpereira/ColorSensingLEDStrip repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ColorSensingLEDStrip design in my own project?
The repository has no license, so all rights stay with sabpereira. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ColorSensingLEDStrip without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k