20 open source boards using the ATTINY1616-MNR

Real designs built with the ATTINY1616-MNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

20 boardsClear filters|Most starred

How designs wire the ATTINY1616-MNR

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the ATTINY1616-MNR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 10 µF).
GNDpin 3, 21Connected to: GND 92%
VCCpin 4Connected to: 3.3V 92%
  • Decoupling capacitor on 75% · 100 nF (9), 10 µF (2), 1 µF (1)
PA7pin 8Connected to: Signal 92%
  • Series resistor on 33% · 150 kΩ (1), 68 Ω (1), 1 kΩ (1)
PC1pin 16Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 100 Ω (2), 470 Ω (1)

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ss main board by loopj, SplitFlapDriverATtiny1616V4.kicad pcb by adamgmakes, Malenki-1616 by MarkR42 and SH-RPi hardware by hatlabs.

The ATTINY1616-MNR in open source designs

The gallery holds 20 open source boards using the ATTINY1616-MNR from 12 GitHub repositories; a typical one measures about 30 × 40 mm and carries around 41 components.

55% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is Ss main board by loopj.

Microcontrollers on boards using the ATTINY1616-MNR

ATTINY1616-MNR: common questions

Where can I find a ATTINY1616-MNR reference design?

Each of the 20 boards on this page is a real design using the ATTINY1616-MNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ATTINY1616-MNR VCC pin?

The VCC pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 12 open source designs using the ATTINY1616-MNR.

What parts are used alongside the ATTINY1616-MNR?

The HT7533-1, C20617301, C20617302, MIC5365-1.8YC5-TR and SN65HVD72DR appear in the most repositories here.

Which microcontrollers do boards using the ATTINY1616-MNR use?

Most are built on AVR/Arduino (20).

How big is a typical board using the ATTINY1616-MNR?

The median is 30 × 40 mm, and 55% are two-layer designs.

What is the most popular open source board using the ATTINY1616-MNR?

By GitHub stars, Ss main board by loopj, with 802 stars.

Can I simulate one of these boards using the ATTINY1616-MNR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part