ServoTester
saif-amara·ServoTester
About the ServoTester PCB
ServoTester is an open source PCB design by saif-amara, published on GitHub. It is a 2-layer board measuring 46 × 32.5 mm, with 10 components from 10 distinct parts.
Other key parts include the NE555P. By type, the board carries 3 resistors, 2 connectors, 2 diodes, 1 IC and 1 capacitor.
It belongs with the robotics & motion designs in this gallery.
From the project
KiCad 9 PCB design for servo tester circuit
A compact PWM servo motor tester PCB designed in KiCad 9, built around the classic NE555 timer IC in astable mode. Turn the potentiometer — the servo follows.
The NE555P is configured in astable (free-running) mode, generating a continuous PWM signal. A potentiometer (RV2) adjusts the RC time constants, which changes the duty cycle of the output pulse — directly controlling the servo motor's angular position.
Main components on the ServoTester
ServoTester bill of materials (BOM)
10 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | Conn_01x02_Pin | PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal | J1 |
| 1 | Conn_01x03_Pin | PhoenixContact_GMSTBA_2,5_3-G-7,62_1x03_P7.62mm_Horizontal | J2 |
| 1 | 100k | Potentiometer_Alps_RK163_Single_Horizontal | RV2 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 1N4148WT | D_SOD-523 | D2 |
| 1 | C | C_0504_1310Metric_Pad0.83x1.28mm_HandSolder | C1 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 56k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
ServoTester design files
The KiCad project lives in the saif-amara/ServoTester repository on GitHub; these links point at the commit this page was built from.
- LayoutServoTester.kicad_pcb
- SchematicServoTester.kicad_sch
- BOMREADME.md
ServoTester: common questions
How big is the ServoTester PCB?
The ServoTester measures 46 × 32.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ServoTester?
10 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ServoTester design files?
From the saif-amara/ServoTester repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ServoTester design in my own project?
The repository has no license, so all rights stay with saif-amara. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979