Keebiter

sakg-dev·keebiter·kicad/kicad.kicad_pcb

Keebiter PCB layout, top view — open source RP2040/RP2350 board by sakg-dev

About the Keebiter PCB

Keebiter is an open source RP2040/RP2350 PCB design by sakg-dev, published on GitHub under the MIT license. It is a 2-layer board measuring 340.6 × 156.5 mm, with 203 components from 10 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 66 switches, 61 LEDs, 61 diodes, 13 capacitors, 1 module and 1 resistor.

It belongs with the keyboards designs in this gallery.

From the project

My first custom mechanical keyboard

My first self made Mechanical Keyboard built through iteration*** -------

Keebiter, from the project README
From the project README

Main components on the Keebiter

Keebiter bill of materials (BOM)

203 components, 10 distinct parts.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
MX_stab
S1
1
MX_stab
S2
3
MX_stab
S3, S4, S5
61
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +53
61
SK6812MINI-E
RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8 +53
61
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +53
1
470u
C1
12
100n
C2, C3, C4, C5, C6, C7, C8, C9 +4
1
330
R1

Keebiter design files

The KiCad project lives in the sakg-dev/keebiter repository on GitHub; these links point at the commit this page was built from.

Keebiter: common questions

What microcontroller does the Keebiter use?

The Keebiter is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keebiter PCB?

The Keebiter measures 340.6 × 156.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keebiter?

203 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Keebiter design files?

From the sakg-dev/keebiter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Keebiter design in my own project?

Yes, under the terms of its MIT license, which sakg-dev chose for the repository.

Can I test firmware for the Keebiter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards