Capstone throttleable engine 2025-26
SARP-UW·capstone_throttleable_engine_2025-26·hardware/cda-pcb/cda-pcb.kicad_pcb
About the Capstone throttleable engine 2025-26 PCB
Capstone throttleable engine 2025-26 is an open source Raspberry Pi PCB design by SARP-UW, published on GitHub. It is a 4-layer board measuring 112 × 127 mm, with 190 components from 36 distinct parts.
Its main chip is the Raspberry Pi 2 or 3, from the Raspberry Pi family. Other key parts include the ADS124S08IRHBT, LT6654BMPS6-5-TRMPBF, LM1086IS-5.0_NOPB, TPS73801DCQR and TPSM63603RDHR. By type, the board carries 96 capacitors, 62 resistors, 15 diodes, 10 ICs and 6 connectors.
It belongs with the sensors designs in this gallery.
From the project
2025-2026 SARP Capstone Project... Firmware for DAQ, valve actuation, and pintle control of a throttleable liquid biprop rocket engine.
A custom Data Acquisition (DAQ) hat designed for the Raspberry Pi. This board interfaces with industrial sensors (RTDs, Load Cells, Pressure Transducers) to log and display live data with high precision.
The system features a robust, low-noise power architecture that manages 24VDC input to power the sensors, the precision analog circuitry, and the Raspberry Pi itself. It utilizes dual 24-bit ADCs communicating over SPI for high-resolution signal digitization.

Main components on the Capstone throttleable engine 2025-26
Capstone throttleable engine 2025-26 bill of materials (BOM)
190 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | ADS124S08IRHBT | QFN50P500X500X100-33N | U1, U2, U3 |
| 1 | LT6654BMPS6-5-TRMPBF | TSOT-23_S6_LIT | U4 |
| 1 | LM1086IS-5.0_NOPB | TO254P1524X483-4N | U5 |
| 1 | TPS73801DCQR | SOT127P706X180-6N | U6 |
| 3 | TPSM63603RDHR | CONV_TPSM63602RDHR | U7, U8, U9 |
| 1 | SN74AHCT125RGYR | RGY14_2P05X2P05 | U10 |
| 4 | ICD15S13E4GX00LF | AMPHENOL_ICD15S13E4GX00LF | J1, J2, J3, J4 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | 0022272021 436500227 | CONN_SD-43650-010_02_MOL | P1 |
| 1 | Raspberry Pi 2 or 3 Raspberry_Pi_4 | raspberrypi_2_3 | RP1 |
| 10 | ESDA6V1BC6 | SOT95P280X145-6N | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 1 | SMS12T1G | SOT95P275X110-6N | D11 |
| 1 | ESDA6V1BC6 | SOT95P280X145-6N | D12 |
| 3 | LED | LED_0805_2012Metric | D13, D14, D15 |
| 30 | 16NF 16nF | CAPC3216X95N | C1, C2, C3, C4, C5, C6, C14, C15 +22 |
| 9 | 3.3NF 3.3nF | C_0603_1608Metric | C7, C8, C9, C10, C11, C12, C13, C85 +1 |
| 12 | 10UF 10uF | CAPC2012X145N | C28, C29, C30, C31, C40, C41, C52, C53 +4 |
| 17 | 1UF 1uF | CAPC1608X94N | C32, C33, C34, C35, C42, C43, C46, C47 +9 |
| 16 | 100NF 100nF | CAPC1608X97N | C36, C37, C38, C39, C44, C45, C48, C50 +8 |
| 6 | 4.7UF 4.7uF | C_0805_2012Metric | C57, C58, C59, C60, C61, C62 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 47UF 47uF | C_1206_3216Metric | C63, C65, C69, C71 |
| 2 | 22UF 22uF | C_1206_3216Metric | C64, C70 |
| 3 | 5.6K 5.6k | R_0603_1608Metric | R1, R2, R56 |
| 3 | 1.8K 1.8k | R_0603_1608Metric | R3, R4, R57 |
| 30 | 10K 10k | R_0603_1608Metric | R5, R6, R7, R8, R9, R10, R11, R12 +22 |
| 1 | 24K 13k | RESC1508X50N | R25 |
| 1 | 3.3K 1.8k | RESC1508X50N | R26 |
| 8 | 20K | RESC1508X50N | R27, R28, R41, R42, R43, R51, R53, R54 |
| 2 | 13K 13k | RESC1508X50N | R29, R31 |
| 1 | 8k | RESC1508X50N | R30 |
| 4 | 100K 100k | RESC1508X50N | R32, R33, R34, R37 |
| 1 | 40.2K 40.2k | RESC1508X50N | R35 |
| 4 | 10K 10k | RESC1508X50N | R36, R38, R40, R52 |
| 1 | 50K 50k | RESC1508X50N | R39 |
| 1 | 5.6k | R_0603_1608Metric | R49 |
| 2 | 1.8k | R_0603_1608Metric | R63, R64 |
Capstone throttleable engine 2025-26 design files
The KiCad project lives in the SARP-UW/capstone_throttleable_engine_2025-26 repository on GitHub; these links point at the commit this page was built from.
Capstone throttleable engine 2025-26: common questions
What microcontroller does the Capstone throttleable engine 2025-26 use?
The Capstone throttleable engine 2025-26 is built around the Raspberry Pi 2 or 3, from the Raspberry Pi family.
How big is the Capstone throttleable engine 2025-26 PCB?
The Capstone throttleable engine 2025-26 measures 112 × 127 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Capstone throttleable engine 2025-26?
190 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Capstone throttleable engine 2025-26 design files?
From the SARP-UW/capstone_throttleable_engine_2025-26 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Capstone throttleable engine 2025-26 design in my own project?
The repository has no license, so all rights stay with SARP-UW. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Capstone throttleable engine 2025-26 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507