1 open source board using the LM1086IS-5.0_NOPB
Real designs built with the LM1086IS-5.0_NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SARP-UWThe LM1086IS-5.0_NOPB in open source designs
The gallery holds 1 open source boards using the LM1086IS-5.0_NOPB from 1 GitHub repository; a typical one measures about 87.5 × 101.5 mm and carries around 77 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is DAQ by SARP-UW.
Microcontrollers on boards using the LM1086IS-5.0_NOPB
LM1086IS-5.0_NOPB: common questions
Where can I find a LM1086IS-5.0_NOPB reference design?
Each of the 1 boards on this page is a real design using the LM1086IS-5.0_NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM1086IS-5.0_NOPB use?
Most are built on Raspberry Pi (1).
How big is a typical board using the LM1086IS-5.0_NOPB?
The median is 87.5 × 101.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM1086IS-5.0_NOPB?
By GitHub stars, DAQ by SARP-UW, with 0 stars.
Can I simulate one of these boards using the LM1086IS-5.0_NOPB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.