HardLabs

Kikad dsign

sarpharaj-09·micromouse-line-follower·Arduino_Nano/pcb_v1/kikad_dsign.kicad_pcb

Kikad dsign PCB layout, top view — open source AVR/Arduino board by sarpharaj-09

About the Kikad dsign PCB

Kikad dsign is an open source AVR/Arduino PCB design by sarpharaj-09, published on GitHub. It is a 2-layer board measuring 114 × 84 mm, with 24 components from 16 distinct parts.

Its main chip is the ARDUINO_NANO, from the AVR/Arduino family. Other key parts include the AMS1117-5.0. By type, the board carries 7 capacitors, 5 connectors, 4 switches, 4 resistors, 2 ICs and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

Line following Micromouse project using Esp32.

# Micromouse: Intelligent Line Follower & Maze Solver

- 🎯 Overview - ✨ Features - 🔬 Technical Specifications - 🏗️ System Architecture - 📋 Project Background - 🎯 Objectives - 📚 Key Technologies - 🔧 Core Components - 🛠️ Methodology - 🎨 Project Gallery - ⚡ Installation & Setup - 🎮 Usage & Operation - 📊 Results & Analysis - 🔮 Future Enhancements - 📁 Project Structure - 📚 Documentation - ⚠️ Limitations & Scope - 📄 License

Kikad dsign, from the project README
From the project README

Main components on the Kikad dsign

AMS1117-5.0ARDUINO_NANO

Kikad dsign bill of materials (BOM)

24 components, 16 distinct parts.

QtyPartRefs
1
AMS1117-5.0
U1
1
ARDUINO_NANO
U4
1
Power_supply
J1
1
Conn_01x11_Pin
J2
1
Motor_Left
J3
1
Motor_Right
J4
1
Conn_01x06_Socket
J5
1
~
MD1
1
SW_SPST
SW1
3
SW_Push
SW2, SW3, SW4
1
LED
D1
2
10uf
C1, C3
4
100nf
C2, C4, C5, C6
1
100uf
C7
1
100
R1
3
10K
R2, R3, R4

Kikad dsign design files

The KiCad project lives in the sarpharaj-09/micromouse-line-follower repository on GitHub; these links point at the commit this page was built from.

Kikad dsign: common questions

What microcontroller does the Kikad dsign use?

The Kikad dsign is built around the ARDUINO_NANO, from the AVR/Arduino family.

How big is the Kikad dsign PCB?

The Kikad dsign measures 114 × 84 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kikad dsign?

24 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Kikad dsign design files?

From the sarpharaj-09/micromouse-line-follower repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Kikad dsign design in my own project?

The repository has no license, so all rights stay with sarpharaj-09. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Kikad dsign without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in micromouse-line-follower

Similar boards