The-Mech

Sash-Reek2010·The-Mech·PCB/KiCAD/KEEB.kicad_pcb

The-Mech PCB layout, top view — open source RP2040/RP2350 board by Sash-Reek2010

About the The-Mech PCB

The-Mech is an open source RP2040/RP2350 PCB design by Sash-Reek2010, published on GitHub. It is a 2-layer board measuring 435 × 132 mm, with 209 components from 11 distinct parts.

Its main chip is the RASPBERRY_PI_PICO, from the RP2040/RP2350 family. By type, the board carries 104 switches, 104 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

It's a 100% ANSI mechanical keyboard featuring a Raspberry Pi Pico as the brains.

The-Mech, from the project README
From the project README

Main components on the The-Mech

The-Mech bill of materials (BOM)

209 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RASPBERRY_PI_PICO
U1
86
SW_Push_45deg
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +78
2
SW_Push_45deg
SW30, SW103
2
SW_Push_45deg
SW38, SW51
2
SW_Push_45deg
SW58, SW91
1
SW_Push_45deg
SW59
2
SW_Push_45deg
SW71, SW75
1
SW_Push_45deg
SW86
7
SW_Push_45deg
SW92, SW93, SW94, SW96, SW97, SW98, SW99
1
SW_Push_45deg
SW95
104
D
D1, D2, D3, D4, D5, D6, D7, D8 +96

The-Mech design files

The KiCad project lives in the Sash-Reek2010/The-Mech repository on GitHub; these links point at the commit this page was built from.

The-Mech: common questions

What microcontroller does the The-Mech use?

The The-Mech is built around the RASPBERRY_PI_PICO, from the RP2040/RP2350 family.

How big is the The-Mech PCB?

The The-Mech measures 435 × 132 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the The-Mech?

209 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the The-Mech design files?

From the Sash-Reek2010/The-Mech repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the The-Mech design in my own project?

The repository has no license, so all rights stay with Sash-Reek2010. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the The-Mech without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards