PCB
Sashabg1228·dread·schemas/controller/PCB/PCB.kicad_pcb
About the PCB
PCB is an open source STM32 PCB design by Sashabg1228, published on GitHub. It is a 2-layer board measuring 80 × 75 mm, with 10 components from 5 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the NRF24L01_Breakout. By type, the board carries 6 connectors, 2 ICs and 2 capacitors.
From the project
hammer saw battlebot inspired by sawblaze
Version 2 of the robot is used for graduation project in school. The type of the robot is changed from sawbot to hammersaw, meaning the saw no longer has the function of cutting but of striking the opponents. The work on this version started at the end of September 2023.
Link to github repo: https://github.com/Sashabg1228/dread.git
Main components on the PCB
PCB bill of materials (BOM)
10 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | STM32F103C8T6_pinout | U1 |
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U2 |
| 6 | 236-102 | CONN_236-102_WAG | J1, J2, J3, J4, J5, J6 |
| 1 | 100nF | C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C1 |
| 1 | 100uF | CP_Radial_D5.0mm_P2.00mm | C2 |
PCB design files
The KiCad project lives in the Sashabg1228/dread repository on GitHub; these links point at the commit this page was built from.
PCB: common questions
What microcontroller does the PCB use?
The PCB is built around the STM32F103C8T6, from the STM32 family.
How big is the PCB?
The PCB measures 80 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB?
10 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB design files?
From the Sashabg1228/dread repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB design in my own project?
The repository has no license, so all rights stay with Sashabg1228. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in dread
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k