Kikad project
Sashabg1228·dread·schemas/robot/kikad_project/kikad_project.kicad_pcb
About the Kikad project PCB
Kikad project is an open source STM32 PCB design by Sashabg1228, published on GitHub. It is a 2-layer board measuring 100 × 110 mm, with 49 components from 19 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the HCPL-2531A-000E, NRF24L01_Breakout, L7805 and CD40109BE. By type, the board carries 18 connectors, 12 capacitors, 8 ICs, 6 resistors, 2 diodes and 1 transistor.
From the project
hammer saw battlebot inspired by sawblaze
Version 2 of the robot is used for graduation project in school. The type of the robot is changed from sawbot to hammersaw, meaning the saw no longer has the function of cutting but of striking the opponents. The work on this version started at the end of September 2023.
Link to github repo: https://github.com/Sashabg1228/dread.git
Main components on the Kikad project
Kikad project bill of materials (BOM)
49 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | HCPL-2531A-000E HCPL-2531 | DIL08 | IC1, IC2, IC3 |
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U1 |
| 1 | STM32F103C8T6 | STM32F103C8T6_pinout | U2 |
| 2 | L7805 | TO-220-3_Vertical | U3, U4 |
| 1 | CD40109BE | DIP794W45P254L1969H508Q16 | U12 |
| 1 | IXTP120P065T | TO-220-3_Vertical | Q1 |
| 1 | 3522-2 | FUSE_3522-2 | X1 |
| 11 | 236-102 | CONN_236-102_WAG | J1, J3, J4, J6, J7, J9, J13, J14 +3 |
| 3 | 236-104 | CONN_236-104_WAG | J2, J10, J11 |
| 4 | 236-401 | 236-744_WAG | J5, J8, J12, J17 |
| 1 | BZX85C10-TAP | DO-41_VIS | D1 |
| 1 | P6KE27CA | DIOAD1300W80L670D310 | D3 |
| 1 | 2.2uH | L_Axial_L16.0mm_D7.5mm_P5.08mm_Vertical_Fastron_XHBCC | L1 |
| 3 | 100uF | CP_Radial_D5.0mm_P2.00mm | C1, C5, C8 |
| 9 | 100nF | C_Rect_L4.6mm_W3.8mm_P2.50mm_MKS02_FKP02 | C2, C3, C4, C6, C7, C9, C10, C11 +1 |
| 1 | 8.2kR | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 3 | 680R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4 |
| 1 | R_Network06 | R_Array_SIP7 | RN1 |
| 1 | R_Pack06_SIP | R_Array_SIP12 | RN2 |
Kikad project design files
The KiCad project lives in the Sashabg1228/dread repository on GitHub; these links point at the commit this page was built from.
Kikad project: common questions
What microcontroller does the Kikad project use?
The Kikad project is built around the STM32F103C8T6, from the STM32 family.
How big is the Kikad project PCB?
The Kikad project measures 100 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kikad project?
49 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kikad project design files?
From the Sashabg1228/dread repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kikad project design in my own project?
The repository has no license, so all rights stay with Sashabg1228. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kikad project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in dread
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k