HardLabs

RfPowerRf

SatcomRadio·Hybrid_Couplers·Kicad/RfPower/RfPower_RF/RfPowerRf.kicad_pcb

RfPowerRf PCB layout, top view — open source board by SatcomRadio

About the RfPowerRf PCB

RfPowerRf is an open source PCB design by SatcomRadio, published on GitHub under the MIT license. It is a 2-layer board measuring 35 × 104 mm, with 5 components from 3 distinct parts.

By type, the board carries 3 connectors, 1 IC and 1 resistor.

It belongs with the rf & radio designs in this gallery.

From the project

Hybrid coupler boards for circular polarization

This repo consists of different boards that use different devices to get circular polarized antennas.

All the PCB boards have a version that where you can use SMA connectors or soldered wires. If you want to use the SMA connector boards, you will need to buy:

You must connect them correctly! Each port has to be a "dipole". Depending on their orientation you will get RHCP or LHCP.

RfPowerRf, from the project README
From the project README

RfPowerRf bill of materials (BOM)

5 components, 3 distinct parts.

QtyPartRefs
1
~
U1
3
~
J0, J90, JIn1
1
32-7001
R1

RfPowerRf design files

The KiCad project lives in the SatcomRadio/Hybrid_Couplers repository on GitHub; these links point at the commit this page was built from.

RfPowerRf: common questions

How big is the RfPowerRf PCB?

The RfPowerRf measures 35 × 104 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RfPowerRf?

5 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the RfPowerRf design files?

From the SatcomRadio/Hybrid_Couplers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RfPowerRf design in my own project?

Yes, under the terms of its MIT license, which SatcomRadio chose for the repository.

More boards in Hybrid_Couplers

Similar boards