MEGA1.0
sauravraj67·MEGA1.0·MEGA 1.0/PCB/MEGA1.0.kicad_pcb
About the MEGA1.0 PCB
MEGA1.0 is an open source RP2040/RP2350 PCB design by sauravraj67, published on GitHub. It is a 2-layer board measuring 60 × 80 mm, with 20 components from 5 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 9 switches, 9 diodes, 1 IC and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
I am making a cool micro pad for myself it has 8 key switches, one rotor encoder and a 0.91 inch screen. It is based on XIAO RP2040. It has 3 layers which would be controlled by the rotor encoder and the selected layer would be displayed on the screen. I also used Hot-Swap so tha
I am making a cool micro pad for myself it has 8 key switches, one rotor encoder and a 0.91 inch screen. It is based on XIAO RP2040. It has 3 layers which would be controlled by the rotor encoder and the selected layer would be displayed on the screen. I also used Hot-Swap so that i don't have to solder/de-solder the switches while changing it. ## Features
- Based on Xiao Rp2040 - Has HotSnap base ## Firmware - Firmware is based on QMK.
Main components on the MEGA1.0
MEGA1.0 bill of materials (BOM)
20 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 1 | Conn_01x04_Pin | OLED_128x32 | J2 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 8 | SW_Push | MX100H | SW5, SW6, SW7, SW8, SW9, SW13, SW14, SW15 |
| 9 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D4, D5, D6, D7, D8, D9, D10, D11 +1 |
MEGA1.0 design files
The KiCad project lives in the sauravraj67/MEGA1.0 repository on GitHub; these links point at the commit this page was built from.
- LayoutMEGA 1.0/PCB/MEGA1.0.kicad_pcb
- SchematicMEGA 1.0/PCB/MEGA1.0.kicad_sch
- BOMBOM.csv
MEGA1.0: common questions
What microcontroller does the MEGA1.0 use?
The MEGA1.0 is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the MEGA1.0 PCB?
The MEGA1.0 measures 60 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MEGA1.0?
20 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MEGA1.0 design files?
From the sauravraj67/MEGA1.0 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MEGA1.0 design in my own project?
The repository has no license, so all rights stay with sauravraj67. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MEGA1.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k