Wheel
sbarisic·MagMouse·hardware/modular/wheel/Wheel.kicad_pcb
About the Wheel PCB
Wheel is an open source PCB design by sbarisic, published on GitHub under the Custom license license. It is a 4-layer board measuring 55 × 60 mm, with 82 components from 29 distinct parts.
Other key parts include the DRV8316RRGFR, SN74LVC08APWR, ADS7038IRTER, SN74LVC125APWR and TLV1811DBVR. By type, the board carries 45 resistors, 25 capacitors, 7 ICs, 2 transistors, 2 connectors and 1 diode.
From the project
Open source hall-effect based mouse - no mechanical contacts - no failure points
2026-09-11. Main and wheel routed with zero unrouted connections. Mechanics remain provisional.
Independent main and wheel schematics now exist. They include J8/J9 signal headers, J10/J11 power headers and local disconnect bias. The wheel also has local bulk storage, TVS and a discharge resistor. Both pass ERC. See the interface review for the implemented changes, verification commands and remaining power-return, wheel-storage and SPI3 timing findings. The wheel PCB has all 87 footprints on its 55 x 60 mm outline. All connections are routed, with zero native unrouted items and zero physical…
Main components on the Wheel
Wheel bill of materials (BOM)
82 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8316RRGFR Texas Instruments | Texas_RGF0040E | U21 |
| 1 | SN74LVC08APWR Texas Instruments | TSSOP-14_4.4x5mm_P0.65mm | U22 |
| 1 | ADS7038IRTER Texas Instruments | WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm | U23 |
| 2 | SN74LVC125APWR Texas Instruments | TSSOP-14_4.4x5mm_P0.65mm | U24, U26 |
| 1 | TLV1811DBVR Texas Instruments | SOT-23-5 | U30 |
| 1 | LM4040AIM3-2.5/NOPB Texas Instruments | SOT-23 | U31 |
| 1 | 2N7002 Jiangsu Changjing Electronics Technology | SOT-23 | Q4 |
| 1 | AO3400A Alpha & Omega Semiconductor | SOT-23 | Q5 |
| 1 | Soldered wires Signal_2x15 | Wire_Signal_2x15_P2.54mm | J9 |
| 1 | Soldered wires Power_1x02 | Wire_Power_1x02_P2.54mm | J11 |
| 1 | SMBJ6.0A Littelfuse | D_SMB | D6 |
| 9 | CC0603KRX7R9BB104 100nF YAGEO | C_0603_1608Metric | C41, C42, C43, C49, C51, C52, C54, C65 +1 |
| 4 | CL21A106KAYNNNE 10uF/25V Samsung Electro-Mechanics | C_0805_2012Metric | C44, C45, C68, C69 |
| 5 | CL10A105KB8NNNC 1uF/50V Samsung Electro-Mechanics | C_0603_1608Metric | C46, C48, C56, C57, C58 |
| 1 | CL10B473KB8NNNC 47nF/50V Samsung Electro-Mechanics | C_0603_1608Metric | C47 |
| 1 | CL21A226MAQNNNE 22uF/25V Samsung Electro-Mechanics | C_0805_2012Metric | C50 |
| 4 | CL10C220JB8NNNC 22pF/50V Samsung Electro-Mechanics | C_0603_1608Metric | C59, C60, C61, C67 |
| 1 | 16SVPC100M 100uF/16V Panasonic | CP_Elec_6.3x5.9 | C90 |
| 1 | 0603WAF220JT5E 22R UNI-ROYAL | R_0603_1608Metric | R81 |
| 9 | 0603WAF1002T5E 10k UNI-ROYAL | R_0603_1608Metric | R82, R84, R86, R98, R111, R137, R138, R139 +1 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 13 | 0603WAF1003T5E 100k UNI-ROYAL | R_0603_1608Metric | R83, R89, R90, R91, R92, R94, R95, R96 +5 |
| 3 | 0603WAF4701T5E 4.7k UNI-ROYAL | R_0603_1608Metric | R87, R88, R146 |
| 3 | 0603WAF3300T5E 330R UNI-ROYAL | R_0603_1608Metric | R102, R103, R104 |
| 5 | 0603WAF0000T5E 0R UNI-ROYAL | R_0603_1608Metric | R105, R106, R107, R108, R109 |
| 1 | 0603WAF3482T5E 34.8k UNI-ROYAL | R_0603_1608Metric | R113 |
| 3 | 0603WAF1004T5E 1M UNI-ROYAL | R_0603_1608Metric | R115, R116, R117 |
| 1 | 0603WAF1000T5E 100R UNI-ROYAL | R_0603_1608Metric | R119 |
| 4 | RC2512JK-7W47RL 47R/2W YAGEO | R_2512_6332Metric | R121, R122, R123, R124 |
| 2 | 0603WAF3302T5E 33k UNI-ROYAL | R_0603_1608Metric | R144, R145 |
Wheel design files
The KiCad project lives in the sbarisic/MagMouse repository on GitHub; these links point at the commit this page was built from.
Wheel: common questions
How big is the Wheel PCB?
The Wheel measures 55 × 60 mm, has 4 copper layers and is 1.578 mm thick.
How many components are on the Wheel?
82 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wheel design files?
From the sbarisic/MagMouse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wheel design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in MagMouse
ESP32
Panel
sbarisic
151 × 139 mm292 parts4LCustom license2ESP32
MagMouse
sbarisic
60 × 95 mm273 parts4LCustom license2ESP32
Main
sbarisic
80 × 125 mm207 parts4LCustom license2ESP32
Lower
sbarisic
70 × 100 mm92 parts2LCustom license2Upper
sbarisic
70 × 100 mm81 parts2LCustom license2Encoder
sbarisic
14 × 18 mm3 parts4LCustom license2