15 open source boards using the SN74LVC125APWR
Real designs built with the SN74LVC125APWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Nest mini drop in
iMike78
74.5 × 70.6 mm243 parts4LCERN-OHL-S-2.0598ESP32
Home mini v1-drop in
iMike78
72.4 × 70 mm223 parts4LCERN-OHL-S-2.0408ESP32
Moss
metrox-eth
82 × 79 mm208 parts4LApache-2.01164ch-RF-FE
JohnnyGOX17
249.9 × 94.7 mm275 parts4LMIT5ESP32
Nest mini v2-voice
marceldale
74.5 × 70.6 mm231 parts4LCERN-OHL-S-2.01HERON
Austin-Hunter1
84 × 56 mm95 parts4LNo license1ESP32
Ptz driver
Aottens
100 × 80 mm251 parts4LNo license0ESP32
ESP32 FC
JS2028EE
70 × 65 mm103 parts4LNo license0LiBo BaseBoard
ItsNotDaan
92.4 × 96.6 mm54 parts2LCERN-OHL-P-2.08ESP32
MagMouse
sbarisic
60 × 95 mm273 parts4LCustom license2ESP32
Rev a input
Aottens
100 × 80 mm251 parts4LNo license0ESP32
Main
sbarisic
80 × 125 mm207 parts4LCustom license2ESP32
Lower
sbarisic
70 × 100 mm92 parts2LCustom license2Wheel
sbarisic
55 × 60 mm82 parts4LCustom license2ESP32
ARDF-TX UNIVERSAL CONTROLLER
DD1SB
100 × 100 mm197 parts2LMIT0
How designs wire the SN74LVC125APWR
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the SN74LVC125APWR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 10 µF).
- The 2A pin has a series resistor on 7 of 11 designs, most often 3.3 kΩ (then 100 Ω).
- The 3A pin has a series resistor on 7 of 11 designs, most often 100 Ω (then 3.3 kΩ).
- The 4Y pin has a series resistor on 7 of 11 designs, most often 100 Ω (then 33 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1Apin 2 | Connected to: The microcontroller 27% |
|
| 1Ypin 3 | Connected to: Signal 82% · not connected 18% |
|
| 2OEpin 4 | Connected to: GND 64% · a signal 36% | — |
| 2Apin 5 | Connected to: The microcontroller 27% |
|
| 2Ypin 6 | Connected to: Signal 82% · not connected 18% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| 3Ypin 8 | Connected to: XU316-1024-QF60B-C24 27% |
|
| 3Apin 9 | Connected to: The microcontroller 27% |
|
| 3OEpin 10 | Connected to: Signal 64% · GND 36% |
|
| 4Ypin 11 | Connected to: Signal 82% · not connected 18% |
|
| 4Apin 12 | Connected to: Signal 82% · GND 18% |
|
| 4OEpin 13 | Connected to: Signal 73% · GND 27% |
|
| VCCpin 14 | Connected to: 3.3V 82% · a signal 18% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nest mini drop in pcb by iMike78, Home mini v1-drop in pcb by iMike78, Moss by metrox-eth and LiBo BaseBoard by ItsNotDaan.
The SN74LVC125APWR in open source designs
The gallery holds 15 open source boards using the SN74LVC125APWR from 11 GitHub repositories; a typical one measures about 80 × 80 mm and carries around 208 components.
80% use four copper layers or more, and 47% carry an open source license.
The most starred is Nest mini drop in pcb by iMike78.
Parts used alongside the SN74LVC125APWR
Microcontrollers on boards using the SN74LVC125APWR
What boards using the SN74LVC125APWR are built for
SN74LVC125APWR: common questions
Where can I find a SN74LVC125APWR reference design?
Each of the 15 boards on this page is a real design using the SN74LVC125APWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC125APWR VCC pin?
The VCC pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the SN74LVC125APWR.
What resistor goes on the SN74LVC125APWR 2A pin?
The 2A pin has a series resistor on 7 of 11 designs, most often 3.3 kΩ (then 100 Ω). Counted from the KiCad layouts of 11 open source designs using the SN74LVC125APWR.
What resistor goes on the SN74LVC125APWR 3A pin?
The 3A pin has a series resistor on 7 of 11 designs, most often 100 Ω (then 3.3 kΩ). Counted from the KiCad layouts of 11 open source designs using the SN74LVC125APWR.
What parts are used alongside the SN74LVC125APWR?
The ESP32-S3R8, MPR121QR2, TLV73333PDBVR, TPS22918DBVR and TPS62065DSGR appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC125APWR use?
Most are built on ESP32 (11).
How big is a typical board using the SN74LVC125APWR?
The median is 80 × 80 mm, and 20% are two-layer designs.
What is the most popular open source board using the SN74LVC125APWR?
By GitHub stars, Nest mini drop in pcb by iMike78, with 598 stars.
Can I simulate one of these boards using the SN74LVC125APWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.