Lower

sbarisic·MagMouse·hardware/two-layer/sandwich/lower/Lower.kicad_pcb

Lower PCB layout, top view — open source ESP32 board by sbarisic

About the Lower PCB

Lower is an open source ESP32 PCB design by sbarisic, published on GitHub under the Custom license license. It is a 2-layer board measuring 70 × 100 mm, with 92 components from 40 distinct parts.

Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the TPD2EUSB30DRTR, TPS62162DSGR, TUSB320LAIRWBR, TPD2E2U06DCKR and SN74LVC125APWR. By type, the board carries 36 resistors, 30 capacitors, 16 ICs, 5 connectors, 2 switches and 2 diodes.

It belongs with the sensors designs in this gallery.

From the project

Open source hall-effect based mouse - no mechanical contacts - no failure points

All four boards are routed and have independent schematics. Native KiCad 10.0.6 checks report zero ERC findings, DRC findings, unconnected items and schematic parity findings under the saved rules. The quote package contains the files for supplier pricing; physical and supplier acceptance remain open.

The standard-via revision uses 0.30 mm via drills and at least 0.45 mm copper lands. All four boards are checked for via-hole/SMD-land overlaps. The derived 223 × 114 mm panel combines one of each board using 2 mm routed gaps and 5 mm mouse-bite tabs. Source copper is copied exactly, with…

Lower, from the project README
From the project README

Main components on the Lower

Lower bill of materials (BOM)

92 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPD2EUSB30DRTR
Texas Instruments
U1
1
TPS62162DSGR
Texas Instruments
U2
1
ESP32-S3-MINI-1-N8
Espressif Systems
U3
1
TUSB320LAIRWBR
Texas Instruments
U11
1
TPD2E2U06DCKR
Texas Instruments
U20
3
SN74LVC125APWR
Texas Instruments
U25, U29, U37
1
TPS22919DCKR
Texas Instruments
U28
1
ICM-42688-P
TDK InvenSense
U32
1
TPS7A2450DBVR
Texas Instruments
U33
1
SN74LV1T34DBVR
Texas Instruments
U34
1
PMW3360DM-T2QU
PixArt
U35
1
TLV75519PDBVR
Texas Instruments
U36
1
TPS22918DBVR
Texas Instruments
U38
1
SN74LVC1G125DBVR
Texas Instruments
U39
1
TYPE-C-31-M-12
Korean Hroparts Elec
J1
1
ENCODER_8P
Soldered wires Signal_2x04
J6
1
WHEEL_SIGNAL_30P
Wheel 17-wire signals / 2 GND
J8
1
Stack signals / 14 wires
J101
1
Stack power / 5 wires
J103
1
TS-1088-AR02016
RESET
XUNPU
SW1
Show 20 more
QtyPartRefs
1
TS-1088-AR02016
BOOT
XUNPU
SW2
1
SMBJ12A
Littelfuse
D1
1
SK6805-EC15
OPSCO Optoelectronics
D5
1
SRP4020CC-3R3M
Bourns
L1
9
CL21A106KAYNNNE
10uF/25V
Samsung Electro-Mechanics
C1, C2, C3, C5, C23, C73, C74, C77 +1
2
CL10A105KB8NNNC
1uF/50V
Samsung Electro-Mechanics
C4, C63
13
CC0603KRX7R9BB104
100nF
YAGEO
C6, C22, C53, C55, C64, C70, C75, C76 +5
3
CL10B225KP8NNNC
2.2uF/10V
Samsung Electro-Mechanics
C71, C81, C82
1
CL10B103KB8NNNC
10nF
Samsung Electro-Mechanics
C72
1
CL10B102KB8NNNC
1nF/50V
Samsung Electro-Mechanics
C79
1
CL10A475KP8NNNC
4.7uF/10V
Samsung Electro-Mechanics
C84
18
0603WAF1002T5E
10k
UNI-ROYAL
R3, R4, R7, R72, R73, R74, R75, R76 +10
2
0603WAF330JT5E
33R
UNI-ROYAL
R5, R6
1
0603WAF8873T5E
887k
UNI-ROYAL
R25
8
0603WAF1003T5E
100k
UNI-ROYAL
R26, R27, R101, R110, R129, R133, R134, R136
1
0603WAF1001T5E
1k
UNI-ROYAL
R28
1
0603WAF0000T5E
0R
UNI-ROYAL
R125
1
0603WAF3300T5E
330R
UNI-ROYAL
R128
1
0603WAF390JT5E
39R
UNI-ROYAL
R132
3
0603WAF3302T5E
33k
UNI-ROYAL
R141, R142, R143

Lower design files

The KiCad project lives in the sbarisic/MagMouse repository on GitHub; these links point at the commit this page was built from.

Lower: common questions

What microcontroller does the Lower use?

The Lower is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.

How big is the Lower PCB?

The Lower measures 70 × 100 mm, has 2 copper layers and is 1.578 mm thick.

How many components are on the Lower?

92 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Lower design files?

From the sbarisic/MagMouse repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Lower design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Lower without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MagMouse

Similar boards