ArduLogger
About the ArduLogger PCB
ArduLogger is an open source PCB design by sbeddes, published on GitHub. It is a 2-layer board measuring 90.5 × 99 mm, with 21 components from 14 distinct parts.
Other key parts include the NMUX1308BQ, DS3231MZ, LD1117S33TR_SOT223 and Adafruit_Feather_Generic. By type, the board carries 8 capacitors, 6 resistors, 3 ICs, 3 connectors and 1 module.
From the project
A compact root module system to use with an Arduino Nano, Screw Terminal, RTC 3231, and SD Card module for simple datalogging.
Primarily for use with the Arduino Nano Family.
The Logger library provides easy device fusion for datalogging using the RTC and SD libraries. While this library can be used for any Arduino IDE cabale board, it was designed to be used with the Arduino Nano family.
Main components on the ArduLogger
ArduLogger bill of materials (BOM)
21 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NMUX1308BQ | DHVQFN-16-1EP_2.5x3.5mm_P0.5mm_EP1x2mm | U2 |
| 1 | DS3231MZ | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U4 |
| 1 | Adafruit_Feather_Generic | Adafruit_Feather | A2 |
| 1 | Micro_SD_Card | microSD_HC_Wuerth_693072010801 | J1 |
| 2 | CONN_01X15_SOCKET Conn_01x15_Socket | PhoenixContact_MSTBVA_2,5_15-G-5,08_1x15_P5.08mm_Vertical | J2, J3 |
| 3 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C2, C4 |
| 1 | 10NF 10nF | C_0603_1608Metric | C3 |
| 1 | 10UF 10uF | C_0603_1608Metric | C5 |
| 3 | 10uF | C_0603_1608Metric | C6, C7, C8 |
| 3 | 4.7K 4.7k | R_0603_1608Metric | R1, R2, R4 |
| 1 | 10K 10k | R_0603_1608Metric | R3 |
| 1 | 100 1k | R_0603_1608Metric | R5 |
| 1 | 10k | R_0603_1608Metric | R6 |
ArduLogger design files
The KiCad project lives in the sbeddes/Agduino repository on GitHub; these links point at the commit this page was built from.
ArduLogger: common questions
How big is the ArduLogger PCB?
The ArduLogger measures 90.5 × 99 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ArduLogger?
21 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ArduLogger design files?
From the sbeddes/Agduino repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ArduLogger design in my own project?
The repository has no license, so all rights stay with sbeddes. Use it as a reference, and ask the author before reusing the design.
