Silas-Keypad

sbunger·Silas-Keypad·PCB/pcb.kicad_pcb

Silas-Keypad PCB layout, top view — open source RP2040/RP2350 board by sbunger

About the Silas-Keypad PCB

Silas-Keypad is an open source RP2040/RP2350 PCB design by sbunger, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 80 × 66 mm, with 19 components from 4 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 10 diodes, 8 switches and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

My hackpad project created for the Blueprint program run by Hackclub. This keypad has eight keys and two programmable status LEDs.

I created this macropad to gain experience in electronics while making something cool that I will actually use. Currently, the keys are as follows from left to right: Row 1: Copy, Paste, Cut, Ctrl-Alt-Del; Row 2: New Tab, Close Tab, Reopen Closed Tab, and new firefox window (requires custom shortcut on windows).

Silas-Keypad, from the project README
From the project README

Main components on the Silas-Keypad

Silas-Keypad bill of materials (BOM)

19 components, 4 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U2
8
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
8
1N4148
D1, D3, D4, D5, D6, D7, D8, D9
2
SK6812MINI
D2, D10

Silas-Keypad design files

The KiCad project lives in the sbunger/Silas-Keypad repository on GitHub; these links point at the commit this page was built from.

Silas-Keypad: common questions

What microcontroller does the Silas-Keypad use?

The Silas-Keypad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Silas-Keypad PCB?

The Silas-Keypad measures 80 × 66 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Silas-Keypad?

19 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Silas-Keypad design files?

From the sbunger/Silas-Keypad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Silas-Keypad design in my own project?

Yes, under the terms of its GPL-3.0 license, which sbunger chose for the repository.

Can I test firmware for the Silas-Keypad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards