Commodore-326173-01
About the Commodore-326173-01 PCB
Commodore-326173-01 is an open source PCB design by schenkmi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 57.9 × 67.9 mm, with 17 components from 12 distinct parts.
Other key parts include the 2364, 27C512 and 6114SRAM. By type, the board carries 5 capacitors, 5 resistors, 3 ICs, 1 crystal, 1 connector and 1 switch.
It belongs with the retro computing designs in this gallery.
From the project
Repository for retro computer cartridges
Main components on the Commodore-326173-01
Commodore-326173-01 bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2364 | DIP-24_W15.24mm | U1-2364 |
| 1 | 27C512 | DIP-28_W15.24mm | U1-27512 |
| 1 | 6114SRAM | DIP-24_W15.24mm | U2 |
| 1 | C64_EXPANSION_PORT | C64_EXPANSION_CARD_68mm | X1 |
| 1 | 27512 Select 8KB | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | RESET | SW_PUSH_6mm_H8mm | SW-RESET1 |
| 1 | 1n4148 | D_DO-34_SOD68_P7.62mm_Horizontal | D1 |
| 2 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 3 | 10u | CP_Radial_D5.0mm_P2.50mm | C3, C4, C5 |
| 1 | 12k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 3 | 5k6 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R5 |
Commodore-326173-01 design files
The KiCad project lives in the schenkmi/Cartridges repository on GitHub; these links point at the commit this page was built from.
Commodore-326173-01: common questions
How big is the Commodore-326173-01 PCB?
The Commodore-326173-01 measures 57.9 × 67.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Commodore-326173-01?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Commodore-326173-01 design files?
From the schenkmi/Cartridges repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Commodore-326173-01 design in my own project?
Yes, under the terms of its GPL-3.0 license, which schenkmi chose for the repository.
More boards in Cartridges
AVR/ArduinoZXSwinSID
78.4 × 49.9 mm69 parts2LGPL-3.00
STM32MONster64
57.9 × 67.9 mm58 parts2LGPL-3.00
C64-cpm smd
57.9 × 48.9 mm53 parts2LGPL-3.00
Commodore CP/M Cartridge
105 × 130 mm51 parts2LGPL-3.00
MONster64 - NetModule
46 × 28.3 mm32 parts6LGPL-3.00
IEEE488-VIE
90.2 × 72.8 mm12 parts2LGPL-3.00
Superzaxxonduo
57.9 × 48.9 mm10 parts2LGPL-3.00
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1k
Videoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k
Amiga External
21.9 × 76.7 mm6 parts2LGPL-3.01.0k
Buffer
53.9 × 23.2 mm13 parts2LGPL-3.01.0k
X1
121.9 × 81.3 mm51 parts2LGPL-3.01.0k
Rgb to hdmi
77 × 97 mm67 parts2LGPL-3.01.0k