Levels

Schenktronics·ST02-levels·hardware/levels/Levels.kicad_pcb

Levels PCB layout, top view — open source board by Schenktronics

About the Levels PCB

Levels is an open source PCB design by Schenktronics, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 15 × 100 mm, with 6 components from 2 distinct parts.

It belongs with the audio designs in this gallery.

From the project

A 3HP Eurorack dual passive attenuator from Schenktronics. Each channel has an input, an output, and a level knob, and the second input is normalled to the first, so one signal can go out at two different levels. No power needed.

A 3HP Eurorack dual passive attenuator from Schenktronics. Each channel has an input, an output, and a level knob, and the second input is normalled to the first, so one signal can go out at two different levels. No power needed.

- 3HP, 15 mm deep behind the panel (skiff-friendly), no power needed - Two channels, each turning a signal down from full level to off - In 2 is normalled to In 1: one input, two outputs at independent levels - Works on audio, CV, gates, and bipolar signals - All through-hole, 22 solder joints: a good first kit

Levels, from the project README
From the project README

Levels bill of materials (BOM)

6 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
AudioJack2_SwitchT
QingPu
J1, J2, J3, J4
2
PTV09A-4020F-B104
R_POT
Bourns
RV1, RV2

Levels design files

The KiCad project lives in the Schenktronics/ST02-levels repository on GitHub; these links point at the commit this page was built from.

Levels: common questions

How big is the Levels PCB?

The Levels measures 15 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Levels?

6 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Levels design files?

From the Schenktronics/ST02-levels repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Levels design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Similar boards